Significant Pegmatite Drill Core Located Mt Edwards Lithium
Released
Released
Announcement PDF
18 November 2016
ASX ANNOUNCEMENT
SIGNIFICANT PEGMATITE DRILL CORE LOCATED
MT EDWARDS LITHIUM PROJECT
HIGHLIGHTS
Several significant pegmatite drill core intersections, some in excess of 60m wide, were identified
and logged in the St Ives core yard, Kambalda WA
Drill core was from historic diamond drilling in areas where no obvious pegmatite outcrops are
present and could potentially represent blind “feeder” pegmatite occurrences
Multiple high ranked target areas are now evident in the drillhole data and surface sampling results
which are still under review
Drill planning and POW preparation underway to test the highest ranked targets
Figure 1. Drill core from hole MND1314, which intersected over 60m of continuous pegmatite in one interval (in photo),
over 100m of combined pegmatite intersections over its length, and ended in pegmatite at 288m downhole
Estrella Resources Limited (ASX:ESR) (Estrella or the Company), is pleased to announce the identification of
multiple thick diamond drill intersections of pegmatite located on the Mt Edwards Lithium Project (MELP).
Estrella will hold 75% of the lithium rights to a group of tenements held by Apollo Phoenix Resources Limited
[(which holds the remaining 25% of the lithium rights) upon completion of the MELP acquisition. Refer to ESR
th
ASX release 7 November 2016].
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia
Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Figure 2. Location of the MELP in relation to other significant LCT pegmatite projects in the region
DRILL INTERSECTIONS
The Company will inherit an extensive database as part of the MELP acquisition, which includes all of the
surface sampling and drilling completed by various companies going back as far as 1967. Interrogation of the
database by Mt Edwards Lithium has resulted in the identification of numerous diamond holes with significant
pegmatite intersections. Previous work over the MELP area focused almost exclusively on nickel and gold
exploration and development with no known lithium exploration undertaken by earlier explorers. Interestingly the
pegmatite intersections are “blind” and not exposed at surface in the near area and could potentially represent
“feeder” pegmatites given their current thickness and noting that a number of the holes have finished in
pegmatite at the end of hole (EOH).
Three of these holes (MND1314, MND1312 at Axis prospect and WID1045 at Larkinville prospect) have thus far
been visually located by Mt Edwards Lithium Pty Ltd in the St Ives core yard. The pegmatite intersections have
been retrieved, marked up and prepared for sampling. A fourth hole, WD4133, was drilled at 132N and
intersected 78.79m of pegmatite from 56.69m downhole. The core for this hole is yet to be located by Mt
Edwards Lithium.
The pegmatite intersections located and logged were as follows:
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia
Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Table 2. Pegmatite intersections located for sampling in the St Ives coreyard.
Hole_ID
Prospect
MGA_East
MGA_North
RL
Dip
Azimuth
From
To
Width
MND1314
Axis
357065
6513876
347
-88
041
121.60
182.00
60.40
MND1314
Axis
198.25
207.8
9.55
MND1314
Axis
208.65
210.35
1.7
MND1314
Axis
211.8
213.9
2.1
MND1314
Axis
216.8
225.85
9.05
MND1314
Axis
228.3
229.3
1.0
MND1314
Axis
236
236.5
0.5
MND1314
Axis
246.6
248.2
1.6
MND1314
Axis
248.95
258.65
9.7
MND1314
Axis
275.35
288
12.65
MND1312
Axis
88.65
102.35
13.69
MND1312
Axis
106.5
120.75
14.25
MND1312
Axis
128.00
159.95
31.95
MND1312
Axis
176.6
179
2.4
MND1312
Axis
179.9
182.8
2.9
MND1312
Axis
195.35
196.1
0.75
MND1312
Axis
196.7
198.6
1.9
MND1312
Axis
201.40
229.50
28.10
MND1312
Axis
231.40
265.00
33.60
WID1045
Larkinville
6.6
17.5
10.9
356932
357560
6513441
6520577
344
355
-87
-45
139
204
Figure 3. Close-up photos of pegmatite core from hole MND1314 on the left and MND1312 on the right
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone
+61 2 9078 7671 Email info@estrellaresources.com.au
Figure 4. Cross section A-B through MND1314. Note that the dip of the pegmatite bodies is not known, but has been inferred
from other pegmatites located nearby at Munda.
Figure 5. Cross section C-D through MND1312. Note that the dip of the pegmatite bodies is not known, but has been inferred
from other pegmatites located nearby at Munda.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone
+61 2 9078 7671 Email info@estrellaresources.com.au
Figure 6. Plan view of the Axis drill target, showing the location of the two cross sections shown in Figures 3 and 4. Note that
most of the holes drilled between the two cross sections intersected significant intervals of pegmatite, but are RAB/AC
holes and too shallow to intersect the thick pegmatites intersected by MND1312 and MND1314.
These holes were drilled by WMC targeting nickel, so the pegmatite intersections were of no interest at the time
and have not previously been assayed for Lithium or any associated Lithium indicator minerals. As a result of
the core not being cut or sampled previously, it now allows the Company to obtain an industry standard ½ core
representative sample of the pegmatites. The core will be cut, sampled and submitted to the laboratory as soon
as practicable.
DRILL PLANNING
Preparations are well underway for a maiden drill program aimed at identifying ore grade Lithium occurrences
within the MELP. Drilling will first target beneath the highest grade lithium rock chip samples from Phase I and
Phase II. Drilling will also target pegmatite intersections in holes MND1312 and MND1314 if the sampling of
them returns significant results.
Approximately 4000m of RC drilling is planned for the maiden program.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone
+61 2 9078 7671 Email info@estrellaresources.com.au
Figure 7. Plan showing highest priority drill targets and planned collar locations
ABOUT THE MELP
2
The MELP consists of 16 tenements covering over 127km on the highly prospective Widgiemooltha Dome. It is
located centrally within what is emerging as a highly endowed and globally significant lithium province.
The MELP location in relation to the other significant LCT pegmatite projects in the province is as follows:
2km east of the recent Goldfields Lithium Alliance (GLIA) Widgiemooltha project acquisition
2km south of Maximus Resources’ recent “high grade lithium discovery” at Spargoville
40km south of the Mt Marion Lithium project
40km SSE of the Londonderry Pegmatites and Lithium Australia’s Lithium Hill project
60km west of the Bald Hill Sn-Ta-Li project and Tawana Resources’ Cowan project
30km north of Pioneer Resources Limited Pioneer Dome Lithium project
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone
+61 2 9078 7671 Email info@estrellaresources.com.au
Table 1. Tenement Schedule
Schedule of Mining and Exploration Tenements
Country
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
State/Region
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Tenement ID
M15/698
M15/75
M15/699
M15/87
M15/74
M15/101
M15/99
M15/653
M15/97
M15/96
M15/102
M15/100
M15/1271
E15/1505
E15/1507
E15/1562
Area Km2
4.2
5.7
3.4
3.6
9.3
9.6
9.8
10
6.8
8.4
9.3
9.6
4.8
2
15
16
Grant Date
22/12/1994
10/11/1984
23/12/1994
26/07/1984
10/11/1984
23/07/1984
23/07/1984
28/01/1993
23/07/1984
23/07/1984
4/01/1985
23/07/1984
2/07/2007
5/10/2016
Application
Application
Interest %
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
For more information, please contact:
Ray Shorrocks info@estrellaresources.com.au
Competent Person Statement
The information in this announcement that relates to Exploration Results, Mineral Resources or Ore Reserves is based on
information compiled by Luke Marshall, who is a consultant to Apollo Phoenix Resources and Mt Edwards Lithium and is a
member of The Australasian Institute of Geoscientists. Mr Marshall has sufficient experience that is relevant to the style of
mineralisation and type of deposit under consideration and to the activity that he is undertaking to qualify as a Competent
Person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resource and
Ore Reserves”. Mr Marshall consents to the inclusion in the report of the matters based on his information in the form and
context in which it appears.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone
+61 2 9078 7671 Email info@estrellaresources.com.au
APPENDIX 3 JORC TABLE 1 - JORC CODE, 2012 EDITION – TABLE 1 MELP
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Sampling
Nature and quality of sampling (e.g. cut
techniques
channels, random chips, or specific specialised
Commentary
No sampling results are reported in this announcement.
The drill core referred to is all of NQ size and is yet to be sampled and assayed.
industry standard measurement tools
appropriate to the minerals under investigation,
such as down hole gamma sondes, or handheld
XRF instruments, etc.). These examples should
not be taken as limiting the broad meaning of
sampling.
Include reference to measures taken to ensure
sample representivity and the appropriate
No measures have been taken to ensure sample representivity at this stage as the project
is in the very early stages of assessment.
calibration of any measurement tools or systems
used.
Aspects of the determination of mineralisation
No determinations were made in this regard.
that are material to the Public Report.
In cases where ‘industry standard’ work has
No samples are reported in this announcement.
been done this would be relatively simple (e.g.
‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to
produce a 30 g charge for fire assay’). In other
cases more explanation may be required, such
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
JORC Code explanation
as where there is coarse gold that has inherent
Commentary
sampling problems. Unusual commodities or
mineralisation types (e.g. submarine nodules)
may warrant disclosure of detailed information
Drilling
techniques
Drill type (e.g. core, reverse circulation, open-
Not applicable, no drill results are being reported.
hole hammer, rotary air blast, auger, Bangka,
sonic, etc.) and details (e.g. core diameter, triple
or standard tube, depth of diamond tails, facesampling bit or other type, whether core is
oriented and if so, by what method, etc.).
Drill sample
recovery
Method of recording and assessing core and
Not applicable, no drill results are being reported.
chip sample recoveries and results assessed.
Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias
may have occurred due to preferential loss/gain
of fine/coarse material.
Logging
Whether core and chip samples have been
geologically and geotechnically logged to a level
of detail to support appropriate Mineral Resource
A log was collected for pegmatite core interval which included sample location, sample
type, date sampled, hole name, hole depth and sample condition.
The logging is qualitative in nature.
estimation, mining studies and metallurgical
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
JORC Code explanation
studies.
Commentary
248.69m of pegmatite intersection have been logged for sampling.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc.)
photography.
The total length and percentage of the relevant
intersections logged.
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary
Not applicable, no drill results are being reported.
Not applicable, no drill results are being reported.
No sample results are being reported.
split, etc. and whether sampled wet or dry.
For all sample types, the nature, quality and
No sample results are being reported.
appropriateness of the sample preparation
No sample results are being reported.
technique.
No sample results are being reported.
Quality control procedures adopted for all subsampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the
grain size of the material being sampled.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Quality of
assay data
and
laboratory
tests
For geophysical tools, spectrometers, handheld XRF instruments,
etc., the parameters used in determining the analysis including
instrument make and model, reading times, calibrations factors
applied and their derivation, etc.
No QAQC procedures have been put in place for the MELP given the
very early stage of assessment.
No geophysical methods or hand-held XRF units have been used for
determination of grades in this announcement.
Nature of quality control procedures adopted (e.g. standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (i.e. lack of bias) and precision have been established.
Verification
of sampling
and
assaying
The verification of significant intersections by either independent or
Not applicable as no intersections are being reported.
alternative company personnel.
The use of twinned holes.
Not applicable, no drill results are being reported.
Documentation of primary data, data entry procedures, data
Drill hole data were sourced from digital sources and original hard-
verification, data storage (physical and electronic) protocols.
copy sampling and assay records, and imported into a central
electronic database. Datashed software is used to validate and
manage the data.
Location of
data points
Discuss any adjustment to assay data.
Li2O was calculated as Li x 2.153.
Accuracy and quality of surveys used to locate drill holes (collar and
Accuracy of drill hole collars has not been verified as they are historic
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
holes.
Evidence of drilling activity has been observed at the collar locations
in the field, but the actual collars have not been surveyed.
Specification of the grid system used.
Surveying was undertaken in MGA94 zone 51.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Data spacing
and
distribution
Quality and adequacy of topographic control.
Topographic control is considered more than adequate for the results
being reported.
Data spacing for reporting of Exploration Results.
Data spacing is relatively irregular given the early stage of
assessment.
Whether the data spacing and distribution is sufficient to establish the
Not applicable, no mineral resource is being reported.
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and
classifications applied.
Orientation
of data in
relation to
geological
structure
Whether sample compositing has been applied
Not applicable, no sampling results are being reported.
Whether the orientation of sampling achieves unbiased sampling of
Not applicable, no sampling results are being reported.
possible structures and the extent to which this is known, considering
the deposit type.
The geometry of the pegmatites and the angle of the drillholes to
them is unknown.
If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
Sample
security
Audits or
reviews
The measures taken to ensure sample security.
Not applicable, no sampling results are being reported.
The results of any audits or reviews of sampling techniques and data.
No audits or reviews have been undertaken on the samples being
reported due to the small number of samples in the dataset.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Mineral
Type, reference name/number, location and ownership including
tenement and
agreements or material issues with third parties such as joint
land tenure
status
ventures, partnerships, overriding royalties, native title interests,
Commentary
Apollo Phoenix Resources (25%) and Mt Edwards Lithium (75%)
hold a combined 100% interest the lithium rights to the project.
There are no known impediments to operate in the area.
historical sites, wilderness or national park and environmental
settings.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
Exploration
done by other
parties
Acknowledgment and appraisal of exploration by other parties.
Exploration has been undertaken by previous holders, but
predominantly Western Mining Corporation (WMC) during the 1980s
and Titan Resources from 2001. Consolidated Minerals took over
Titan in 2006. No mining for Li has been undertaken on the project.
Geology
Deposit type, geological setting and style of mineralisation.
The geology at MELP consists of a mafic-ultramafic belt bound to the
east by metasediments and to the west by granites.
The mineralisation at MELP consists of pegmatite swarms in
greenstone belts at some distance from their parent granites.
The lithium baring minerals identified to date are spodumene and
accessory lepidolite.
Depth of complete oxidation varies from 10 to 80 metres below the
natural surface but is typically around 40 metres.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
Drill hole
Information
JORC Code explanation
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information
Commentary
No drill results are reported in this announcement.
No information is excluded.
for all Material drill holes:
Collar location details and hole depths are included in Table II of
o
easting and northing of the drill hole collar
o
elevation or RL (Reduced Level – elevation above sea
level in metres) of the drill hole collar
o
dip and azimuth of the hole
o
down hole length and interception depth
o
hole length.
announcement; all holes are located at surface.
WID1045 is 209.5m long.
MND1312 is 265m long.
MND1314 is 288m long.
If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should clearly
explain why this is the case.
Data
aggregation
methods
In reporting Exploration Results, weighting averaging techniques,
Not applicable, no results are being reported.
maximum and/or minimum grade truncations (e.g. cutting of high
grades) and cut-off grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low grade results, the procedure used
for such aggregation should be stated and some typical examples of
such aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent values
No metal equivalents are used.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
JORC Code explanation
should be clearly stated.
Commentary
Relationship
between
mineralisation
widths and
intercept
lengths
These relationships are particularly important in the reporting of
Not applicable as no results are being reported.
Exploration Results.
If the geometry of the mineralisation with respect to the drill hole
The geometry of the pegmatites in relation to the drillholes is
unknown at this stage.
angle is known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (e.g. ‘down hole length, true
width not known’).
Diagrams
Appropriate maps and sections (with scales) and tabulations of
Appropriate maps and tables are included in the body of the Report.
intercepts should be included for any significant discovery being
reported. These should include, but not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
Balanced
reporting
Where comprehensive reporting of all Exploration Results is not
This is not a large enough dataset to ensure balanced reporting.
practicable, representative reporting of both low and high grades
and/or widths should be practiced to avoid misleading reporting of
Exploration Results.
Other
substantive
exploration
data
Other exploration data, if meaningful and material, should be
reported including (but not limited to): geological observations;
geophysical survey results; geochemical survey results; bulk samples
– size and method of treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock characteristics; potential
Pegmatite occurrences were identified from historic detailed
geological mapping and then confirmed by ground checking.
Geological observations are included in the report. All core drilled at
MELP is available for review and is stored at either the Fisher mine
offices or the St Ives core yard in Kambalda.
deleterious or contaminating substances.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
JORC Code explanation
Commentary
Metallurgical test work is out of the scope of this report.
Not applicable as no results are being reported.
Further work
The nature and scale of planned further work (e.g. tests for lateral
extensions or depth extensions or large-scale step-out drilling).
sampling are planned, followed by drill testing of the most
anomalous pegmatites.
Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling areas,
provided this information is not commercially sensitive.
Further field confirmation, drill cutting and sampling and rock chip
The presence of possible extensions cannot be determined at this
stage.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Share your feedback
Discover