High Grade Copper intersected at Colupo Norte Prospect
Released
Released
Announcement PDF
Chile’s star in copper-gold
ASX ANNOUNCEMENT
28 August 2014
ESTRELLA RESOURCES LIMITED
ACN 151 155 207
AUSTRALIAN REGISTERED OFFICE:
Level 51 MLC Centre 19-29 Martin Place
Sydney NSW 2000 Australia
CONTACT DETAILS:
Email: admin@estrellaresources.com.au
High Grade Copper intersected at Estrella’s
Colupo Norte Prospect
HIGHLIGHTS
Colupo Norte:
CHILE OFFICE:
Santa Beatriz 294
Providencia, Santiago, Chile
High grade copper intersected from surface at Colupo Norte;
Shallow RC drilling program intercepts at Colupo Norte include:
o
ASX CODE: ESR
For further information please contact:
Dr. Jason Berton MAusIMM
Managing Director
Email: admin@estrellaresources.com.au
o
4 m @ 1.1% Cu from 1m (RCCN-02), including;
1m at 2.6% Cu from 3m; and
2 m @ 1.1% Cu from 8m (RCCN-02), including;
1m at 1.5% Cu from 9m.
Two mineralised tourmaline breccias intersected near surface; and
125 m strike length identified and remains open along strike and depth.
Colupo:
Colupo shallow RC drilling identifies prospective tourmaline breccias; and
Colupo maiden Mineral Resource due late September.
Antucoya West:
1.
Large Porphyry Target drill testing ready at Antucoya West.
Introduction
Estrella Resources Limited (ASX: ESR, Estrella or the Company) is pleased to advise
that it has now received the assay results from its initial 4 hole Reverse Circulation
(RC) drilling program at the Colupo Norte prospect. Drilling has identified high grade
copper mineralisation from surface and intersected two tourmaline breccias in the
process. A strike length of 125m has been identified and mineralisation remains
open along strike and depth.
In addition to the ongoing work at Colupo Norte, the Company is proceeding with
obtaining its initial JORC resource at the Colupo Prospect and has undertaken a
detailed review of all available data for its Antucoya West Prospect where the
Company believes that there is a strong potential for a significant copper mineralised
porphyry system beneath this zone
www.estrellaresources.com.au
AUSTRALIA | CHILE
ASX ANNOUNCEMENT
2. Colupo Norte
Estrella’s initial 4 hole RC drilling program has identified high grade copper mineralisation from surface at the Colupo
Norte Prospect within Estrella’s flagship project, Altair. Estrella’s exploration team is pleased to report that its
systematic and targeted approach has been successful in identifying further Colupo-style high grade copper
mineralisation commencing near-surface.
Mineralisation trend
Figure 1: Trenches at Colupo Norte where shallow drilling has identified high grade copper mineralisation
commencing at surface within two tourmaline breccias.
Assay results from the initial drill program have been received which demonstrates that all mineralisation is hosted
within two tourmaline breccias (refer Table 1 below).
Table 1: Colupo Norte assay summary using 0.2% Cu cut-off. Note, all mineralisation is host within Tourmaline
Breccias.
Hole ID
Easting
Northing
RL
EOH
Azimuth
Dip
RCCN-01
400,988 7,517,317
2075
24
230
-70
RCCN-02
400,981 7,517,410
2075
26
230
-70
incl
RCCN-03
400,983 7,517,383
2075
20
230
incl
-70
From
(m)
2
9
1
3
8
9
1
To
(m)
8
10
5
4
10
10
4
Interval
Cu%
6
1
4
1
2
1
3
0.4
0.4
1.1
2.6
1.1
1.5
0.4
(Coordinates in PSAD56, zone19s)
2
AUSTRALIA | CHILE
ASX ANNOUNCEMENT
Table 2: Colupo Norte assay results summary without using a copper grade cut. Note, all intersections are within
tourmaline breccias.
Hole ID
Easting
Northing
RCCN-01
400,988
RCCN-02
RCCN-03
400,981
400,983
RL
EOH Azimuth
Dip
7,517,317 2075
24
230
-70
7,517,410 2075
7,517,383 2075
26
20
230
230
-70
-70
From
(m)
0
18
0
0
8
14
To
(m)
13
23
10
5
12
17
Interval
Cu%
Cu ppm
13
5
10
5
4
3
0.2
0.2
0.8
0.3
-
658
881
(Coordinates in PSAD56, zone19s)
The Colupo Norte Prospect is 2.8 km north northwest of the Colupo Prospect with both Prospects having easy vehicle
access. Estrella’s exploration team identified copper oxide mineralisation at Colupo Norte in January 2014 (refer ASX
announcement 28 January 2014). The initial interest in Colupo Norte followed regional hyperspectral image processing
that Estrella undertook across the Altair Project and identified similar alteration zones expressed at surface to those
observed at Colupo. Subsequent mapping of trenches at Colupo Norte revealed one tourmaline breccia with copper
oxide in a similar fault setting to Colupo. The hyperspectral work identified numerous other similar alteration zones
which Estrella’s exploration team is currently assessing with field visits.
The purpose of the RC drill program at Colupo Norte was to cost-effectively penetrate the ‘Caliche’ gravel cover to
identify occurrences of tourmaline breccias and test the near-surface mineralisation potential of the copper oxide.
Three of the four holes drilled at Colupo Norte intersected mineralised tourmaline breccias as shown in Tables 1 and 2.
Three drill holes were drilled to 20 metres depth, with the maximum depth drilled to 26 metres (hole RCCN-02). The
fourth hole was drilled in the opposite direction to test the dip direction of the tourmaline breccias. No mineralisation
was intersected and the dip was confirmed to be to the northeast.
Estrella is greatly encouraged by the results from the shallow RC drill holes because holes RCCN-01, 02 and 03 each
intersected two mineralised tourmaline breccias (where previously only one was thought to occur) along a 125 metre
strike length. The system remains open along strike and at depth.
The hyperspectral image processing technique has identified approximately a dozen other targets within the same 30
km trend along the Buey Muerto Fault Zone (BMZ) upon which both Colupo and Colupo Norte are situated. Estrella’s
exploration team is rapidly assessing each target in the field to be ready for drill testing in October. Some of the targets
identified lie within Estrella’s 100% owned tenements and will be announced to the market once the field program is
completed and all information has been collated.
AUSTRALIA | CHILE
3
ASX ANNOUNCEMENT
Figure 2: Strong copper oxide mineralisation within a tourmaline breccia from surface at Colupo Norte.
Figure 3: Locality map of Estrella’s Altair Project in Region II, northern Chile (Map Datum WGS84 Zn19s).
AUSTRALIA | CHILE
4
ASX ANNOUNCEMENT
3.
More Tourmaline breccias identified at Colupo
Assay results have also been received for the 21 shallow RC drill holes from the program at Colupo. Several holes
successfully intersected tourmaline breccias with anomalous copper and molybdenum values. The purpose of the
drilling program was to identify tourmaline breccias near to the known extents of mineralisation but concealed by the
‘caliche’ gravel cover. Mineralisation at Colupo is host within the tourmaline breccias with the first objective being to
locate the breccias. All drill holes were drilled to only 20 metres deep to conserve costs and avoid unnecessarily drilling
long intercepts of non-prospective volcanic rocks. It is unlikely that every breccia will host high grade mineralisation
within the first few metres although it can occur (for example, high grades at Colupo Norte in hole RCCN-02).
Consequently, any detection of tourmaline breccias is considered highly prospective and requires deeper drilling to test
their metal content.
Assay results for the non-prospective volcanic units at Colupo are typically below 80 ppm. The best anomalous intervals
detected within the prospective tourmaline breccias were in holes RCBC-017 and RCBC-018 (800 ppm Cu) (see Table 3).
Estrella will further test this zone to see if it is a displaced section of the main WNW trending mineralised tourmaline
breccias. It is important to note that in Table 2, similar anomalous values were detected in hole RCCN-03 at Colupo
Norte to the anomalous values detected in tourmaline breccias at Colupo (approximately 800 ppm), where just 27
metres away, high grade copper grades were intersected in hole RCCN-02 within the same tourmaline breccias.
Figure 4: Colupo drill plan layout showing follow up tourmaline breccia zones identified by the shallow RC drill hole
campaign (Map Datum WGS84, zn19s).
AUSTRALIA | CHILE
5
ASX ANNOUNCEMENT
Table 3: Copper oxide anomalies in tourmaline breccias intersected by shallow RC drill holes at Colupo.
Hole ID Easting Northing RL EOH Azimuth Dip
RCBC-01 402,223
7,514,634 1910
20
0°
-90°
RCBC-08 401,884
RCBC-012 401,918
RCBC-017 401,864
7,514,539 1910
7,514,591 1910
7,514,454 1910
20
20
20
190°
120°
210°
-70°
-70°
-70°
RCBC-018 401,862
7,514,455 1910
20
120°
-70°
RCBC-019 401,974
7,514,606 1910
20
120°
-70°
From
(m)
To
Interval Cu ppm
(m)
8
10
14
16
0
2
0
10
12
16
18
2
4
2
2
2
2
2
2
2
2
355
425
800
397
761
542
485
2
4
2
789
4
6
2
556
10
12
2
432
6
8
2
444
(Coordinates in PSAD56, zone19s)
The combination of identifying several more Tourmaline Breccias at Colupo and Colupo Norte highlights the potential
for Estrella to extend the known mineralisation at these prospects and discover more prospects with high grade nearsurface occurrences in a similar geological setting. Continued exploration success will greatly assist Estrella’s objective
of eventually extracting the ore for economic purposes.
4.
Colupo progressing to Mineral Resource and Exploration Target
The next step along Estrella’s path to becoming a copper producer is progressing to a maiden JORC 2012 Mineral
Resource statement for Colupo. Estrella expects to release the resource statement in late September 2014, which will
include both a Mineral Resource statement and an Exploration Target.
5.
Antucoya West porphyry target
In August, Estrella reviewed all geological data obtained from the recent 38 RC hole porphyry detection program (refer
ASX announcement 5 August 2014) with respect to the geophysical dataset across Antucoya West and the Antucoya
mine development (owned by Antofagasta Minerals PLC, LON:ANTO). Estrella’s recent exploration activity at Antucoya
West has been highly successful in identifying mineralisation, increasing understanding of the geology and the
relevance of all the geophysical responses, which has boosted the project’s porphyry prospectivity.
Estrella’s exploration team has concluded following the review that the highest ranked porphyry target lies 1000
metres to the northeast of hole RCAW019. Estrella believes that there is strong potential for a significant copper
mineralised porphyry system beneath this zone. Based on the MT inversion depth slices (see Figure 7) copper sulphide
mineralisation is expected to commence at approximately 150 metres beneath the surface, copper oxide mineralisation
is expected between the surface and 150 metres.
In summary, Estrella believes in the strong potential and has selected the porphyry target zone location because of:
The large ‘washed-out’ anomaly between two magnetic highs (La Negra Volcanics) is similar to the ‘washedout’ zone over Antucoya (not Estrella owned) (see Figure 4);
The extensive presence of Cu-Copiapite and Jarosite oxidation located above a strong pyrite zone;
Typically, copper sulphides such as Chalcopyrite emit chargeability responses around 25 to 35 msecs. Estrella
currently believes that the chargeability responses consistent with Chalcopyrite lie immediately adjacent to the
pyrite zones (see Figure 5) and
AUSTRALIA | CHILE
6
ASX ANNOUNCEMENT
The Magnetotelluric (MT) inversion model (Figure 6) indicates that the Chalcopyrite target zone commences at
about 150 metres depth.
Figure 5: Airborne Magnetics image (ASVI) over Antucoya West overlaid with mapped geology, mineralisation related
oxidation extents and copper oxide intercepts from the recent 38 RC hole detection program by Estrella in June-July
2014 (Map Datum WGS84 Zn19s).
AUSTRALIA | CHILE
7
ASX ANNOUNCEMENT
Figure 6: Vector IP image over Antucoya West overlaid with mapped geology, mineralisation related oxidation extents and copper
oxide intercepts from the recent 38 RC hole detection program by Estrella in June-July 2014 (Map Datum WGS84 Zn19s).
Figure 7: MT inversion model 100m depth slice over Antucoya West overlaid with mineralisation related oxidation extents and
copper oxide intercepts from the recent 38 RC hole detection program by Estrella in June-July 2014 (Map Datum WGS84 Zn19s).
AUSTRALIA | CHILE
8
ASX ANNOUNCEMENT
6. Commentary
Commenting on the exploration progress across the Altair Project, Estrella's Managing Director, Dr. Jason Berton, said:
“Estrella has been successful at generating high quality prospects through diligent and cost effective exploration.
As an exploration company Estrella is in a unique position to potentially develop multiple near-surface high copper
grade prospects of the Colupo area into a mining district as well as potentially unveil a large localised porphyry system
at Antucoya West”
Competent Person’s Statement
Exploration information in this announcement is based upon work undertaken by Dr. Jason Berton, the Managing Director and a fulltime employee of Estrella Resources Limited whom is a Member of the Australasian Institute of Metallurgy and Mining (AusIMM). Dr
Berton has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the
activity which he is undertaking to qualify as a ‘Competent Person’ as defined in the 2012 Edition of the ‘Australasian Code for
Reporting of Exploration Results, Mineral Resources and Ore Reserves’ (JORC Code). Dr Berton consents to the inclusion in this
presentation of the statements based on his information and context in which they appear.
About Estrella Resources
Estrella Resources Limited is an ASX listed, Chilean focused
copper-gold exploration company. Estrella has a number of
exploration projects in Chile. With a highly experienced board, a
strong operational and management team and a sole focus on
Chilean copper and gold projects, the Company is well positioned
to develop its projects and add value for shareholders.
Directors and Management
Independent Non-Executive
Chairman:
-Robert Thomson
Independent Non-Executive
Director:
-Julian Bavin
ESTRELLA RESOURCES LIMITED
ACN 151 155 207
ASX CODE: ESR
ORDINARY FULLY PAID SHARES:
108,278,728
UNLISTED OPTIONS:
12,380,000
Managing Director
-Dr. Jason Berton
Company Secretary
-Justin Clyne
AUSTRALIA | CHILE
9
ASX ANNOUNCEMENT
JORC Code, 2012 Edition – Table 1 report template
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any measurement
tools or systems used.
Aspects of the determination of mineralisation
that are Material to the Public Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple (eg
‘reverse circulation drilling was used to obtain
1 m samples from which 3 kg was pulverised
to produce a 30 g charge for fire assay’). In
other cases more explanation may be
required, such as where there is coarse gold
that has inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant disclosure
of detailed information.
Sample recoveries for reverse circulation were
systematically recorded. The sampling of RC drilling
cuttings was undertaken at intervals of two meter by
reduction of the drill cuttings with a Jones riffle splitter
to provide approximately 60kg of RC cuttings per 2m
interval. Approximately 20kg of <10# coarse reject
material is stored on site for reference.
The sampling procedures included two reduction of
the drill cutting with the Jones riffle splitter for the
sample to be analyzed and for the duplicate, the ticket
identification, the cutting box labeling and the bag
labeling of RC samples in the field area and selection
of field duplicates were carried out.
The RC drilling cuttings samples were transported to
the facilities of ALS Chemex, an international certified
Laboratory in Antofagasta. The cutting boxes and
pulps of all samples are stored for logging and
reference in the temporal warehouse of the company
at Maria Elena town, II Region, Chile.
Photography of cutting box were performed at the
Maria elena Company facilities.
Drilling
techniques
Drill type (eg core, reverse circulation, openhole hammer, rotary air blast, auger, Bangka,
sonic, etc) and details (eg core diameter,
triple or standard tube, depth of diamond tails,
face-sampling bit or other type, whether core
is oriented and if so, by what method, etc).
The RC drilling method was down-the-hole hammer
drilling and the most frequently used hammer bit was
5¾” diameter, although occasionally 5½” bits were
also used. Shallow hole were drilled ranging from 20
to 66m depth. The objective of this drilling campaign
was to investigate and intersect targets zone below
the caliche cover, defined by surface geological
mapping, surface rock chip anomalies and XRF
surface anomalies zones in conjunction with structural
potentially mineralized corridor and chargeability and
resistivity VIP survey results.
Drill sample
recovery
Method of recording and assessing core and
chip sample recoveries and results assessed.
Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
Whether core and chip samples have been
geologically and geotechnical logged to a
level of detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or quantitative
in nature. Core (or costean, channel, etc)
photography.
Standard splitting and sampling protocols were
implemented.. RC cuttings are reduced by riffle
splitting in the field to 25% of the original drilled
interval. Sample protocols included sample duplicates
for RC (25% of total) at ~5% of total samples
RC samples weight data capture for recovery has
been systematically implemented at the drilling site.
Logging
AUSTRALIA | CHILE
All RC cuttings are logged on site immediately after
drilling, and geologists carried out a Quick Logging
1:1000 scale for preliminary geological interpretation.
The Quick Log captures lithology contrast, general
alteration type and relevant ore mineralization. Paper
RC Quick logs are filed on site and data is input into
the pdf database.
The entire drill hole cuttings are detailed logged at
10
ASX ANNOUNCEMENT
Criteria
JORC Code explanation
Commentary
The total length and percentage of the
relevant intersections logged.
Sub-sampling
techniques and
sample
preparation
Quality of
assay data and
laboratory tests
If core, whether cut or sawn and whether
quarter, half or all core taken.
If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Quality control procedures adopted for all
sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the sampling
is representative of the in situ material
collected, including for instance results for
field duplicate/second-half sampling.
Whether sample sizes are appropriate to the
grain size of the material being sampled.
The nature, quality and appropriateness of
the assaying and laboratory procedures used
and whether the technique is considered
partial or total.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the analysis
including instrument make and model,
reading times, calibrations factors applied and
their derivation, etc.
Nature of quality control procedures adopted
(eg standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (ie lack of bias) and
precision have been established.
Samples from the current program are prepared and
analyzed at ALS Chemex Laboratories (ALS) in
Antofagasta, II Region, Chile. The ALS laboratory
holds ISO 9001:2008 and ISO 17025 certification and
is independent of the company and its subsidiaries.
Samples were typically dried, crushed to 70% passing
-2 mm, and pulverized to 85% passing -0.075 mm.
Pulverized samples were assayed for 33 elements by
atomic emission spectroscopy/inductively-coupled
plasma (ICP-AES) using the ALS ME-ICP61 method
which comprises near-total, four acid digestion,
followed by HCl dilution and ICP-AES determination.
Mechanical Sample preparation was undertaken by
ALS Chemex in a sample preparation facility installed
in Antofagasta. Preparation procedures followed the
following mechanical preparation steps: Drying at
105°C; Primary crushing in a “Rhino” jaw crusher to
70% passing <10# Tyler; Homogenization and
reduction by Jones Riffle Splitter Pulverizing to 85%
passing <150# Tyler; Splitting to 2 sample pulp bags
of approx. 500 g each.
One certified standard reference material were
inserted each 20 samples in the sample pulps stream
during the Company drilling campaign at ALS
Chemex facilities in Antofagasta. New bar codes
sequence for pulps stream were generated and
registered in the excel database and printed.
Correlations between cutting samples and new bar
codes were registered at the excel database and
printed. A complete set of original pulps with bar
codes is storage at ALS facilities. One certified
GEOSTATS standard were used for Copper
reference. Low grade copper standard (code Std Cu
GbM301-4) nominal value: 0,165% CuT. Blanc
material consist of quartz was inserted each 40
meters at ALS facilities for approximately the 2,5% of
the sampled material in the drilling campaign. ALS
customarily inserts pulp duplicates, blanks and
reference materials in the assay batches.
The laboratory is clean and well run, with a full-time
chemist supervising operations. Based on a shift
AUSTRALIA | CHILE
1:100 scale. The logging scheme and logging sheet
reflects the local geology in data capture. Standard
logging and coding sheets were created for this work,
a single person imposed consistency on the logging
and coding processes. The holes mapped have
complete data records that include lithology, alteration
associations, degree and texture, mineralization type
and minerals, intensity, relative abundance in
percentage, texture and occurrence type and
interpreted faulting.
The mapping system, is undertaken on paper logging
forms and data capture has been migrated to digital
capture on the Excel database Once all analysis of
RC sample at 2m support is completed mineralization
coding will be locally revised to include the
mineralogy as continual infill drilling progresses.
11
ASX ANNOUNCEMENT
Criteria
JORC Code explanation
Commentary
seven days per week.
Verification of
sampling and
assaying
Location of
data points
Data spacing
and distribution
Orientation of
data in relation
to geological
structure
The verification of significant intersections by
either independent or alternative company
personnel.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and other
locations used in Mineral Resource
estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration
Results.
Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the
Mineral Resource and Ore Reserve
estimation procedure(s) and classifications
applied.
Whether sample compositing has been
applied.
Whether the orientation of sampling achieves
unbiased sampling of possible structures and
the extent to which this is known, considering
the deposit type.
If the relationship between the drilling
orientation and the orientation of key
mineralized structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
Assay data are supplied electronically by ALS, and
uploaded into the spread sheet. Additionally ALS
provides an access controlled server data base were
the results could be revised and/or downloaded.
The local coordinate system employed for collar
location is PSAD56 19S in UTM projections. The
collar locations of all holes are surveyed using
standard GPS method.
Drill hole collars were at irregular intervals, at
approximately 50m spaces. No attempt should be
made to establish geological continuity at Colupo
Norte at this early stage of exploration. Additionally it
is too early to infer that the tourmaline breccias
identified at Colupo will progress to Miineral Resource
category without further drill testing.
2 metre sample intervals were used at Colupo and 1
metre sample intervals were used at Colupo Norte.
Sample
security
AUSTRALIA | CHILE
The measures taken to ensure sample
security.
Distrital scale structures are a key factor in the
localization of potential and observed mineralization in
the project area. Faults are highly significant aspects
of the project geology.
The property is located along the Buey Muerto Fault
Zone a north-northwest trending fault splay which
control the location of Antucoya Porphyry deposit, as
a part of a 3 to 15km wide zone of inter-related faults
of the major regional, north-south trending, sinistral
strike-slip Atacama Fault Zone, which was active
during the Early Cretaceous, that extends for much of
the length of the Coastal Cordillera. The Buey Muerto
Fault Zone exhibit a 40 km length trace and contribute
to lithological contact between the Upper Jurassic
plutonic batholith to the west with the upper JurassicCretacic volcanic sequences to the east. The synmineralization structures are likely to have controlled,
the localization of intense fracturing and emplacement
of hydrothermal alteration. The interpreted local
structures in Colupo and Colupo Norte are significant
in control of the limonite-altered outcrops
emplacement and in hosting oxide copper
mineralization occurrences showing a degree of
continuity in the north north west-south south east
direction.
The RC drilling campaign included 21 holes (inclined
and vertical) to 20m depth at Colupo and 4 holes
inclined at Colupo Norte.
Samples were transported by ALS using transport
services trucks
and personnel, and were securely locked at the ALS
Labs. Chain-of-custody procedures consisted of filling
12
ASX ANNOUNCEMENT
Criteria
JORC Code explanation
Commentary
Audits or
reviews
The results of any audits or reviews of
sampling techniques and data.
out sample submittal forms that accompanied the
sample shipments to confirm that all samples were
received by the laboratory. Sample security consisted
of locking samples, once collected, in the field camp
compound prior to delivery to ALS. This level of
security is considered industry standard for earlystage exploration programs.
Sample rejects and Pulps are currently stored at ALS
in a secure environment. Company sampling data are
stored in an Excel spread sheet.
Assay results were found to remain well beneath 5%
deviation from reported lab results when compared
with duplicate samples.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
Exploration
done by other
parties
Geology
Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint
ventures, partnerships, overriding royalties,
native title interests, historical sites,
wilderness or national park and
environmental settings.
The security of the tenure held at the time of
reporting along with any known impediments
to obtaining a licence to operate in the area.
There are no native title interests, historical sites,
national parks, wilderness or environmental settings
to Estrella’s knowledge.
Acknowledgment and appraisal of exploration
by other parties.
SQM drilled 15 RC holes at Colupo in 2010-2011, the
Deposit type, geological setting and style of
mineralisation.
results of this have been released to the ASX by
Estrella on multiple occasions See ASX
announcements; 18 March 2013, 11 Nov 2013, 3
Dec 2013, 18 March 2014.
AUSTRALIA | CHILE
The Altair project under Option Agreement with SQM
and is comprised of 444 tenements known as
‘Pertenencia’s’ which are registered with and
maintained by SQM and with no encumbrances.
Estrella holds 100% ‘metals’ rights with SQM
maintaining 49% ‘clawback’ upon completion of a
prefeasibility study. Royalty commitments have been
previously published in ASX announcements.
Mineralization of the project and other deposits in the
region are part of the Stratabound family of deposits.
Porphyry Cu (Mo), Copper bearing veins and IOCG
type deposit could be found in the District. Stratabound Cu- (Ag) deposits, long known as ‘Chilean
manto-type’, occur along the Coastal Cordillera of
northern Chile (22º-30ºS) hosted by Jurassic and
Lower Cretaceous volcanic. The mineralisation took
place at the time of stru
Share your feedback
Discover