Carr Boyd Lithium Update
Released
Released
Announcement PDF
ASX:ESR
18 October 2023
Carr Boyd Lithium Update
HIGHLIGHTS
➔ Unsolicited approach from a leading global mining group prompted an initial review of Lithium
prospectivity at Carr Boyd
➔ Historical pegmatite drill intersections indicate extensive and thick pegmatites exist, with a new
pegmatite field located east of our Carr Boyd Ni/Cu exploration area
➔ Historical drilling and mapping define a 9km x 14km area of pegmatite sub-crop and float under shallow
cover (Figure 1)
➔ Soil geochemistry work by Estrella highlights the Carr Boyd Rocks monzogranite’s LCT potential with
mid-level Cs-Ta anomalism co-incident with potassium radiometrics and distal Li anomalism
➔ Historical lithium work has been reviewed with no REE work conducted on the Carr Boyd monzogranite
prior to Estrella’s ownership
➔ A previous 7km x 3km geochemical survey by Estrella over T5 shows Cs-Ta anomalism associated with
the newly identified pegmatite field
➔ Estrella has commenced initial exploration work to identify the lithium potential of the tenure
Figure 1: Location and extent of pegmatite subcrop and float material from the Carr Boyd Rocks Monzogranite with
associated potassium radiometric anomalism indicating pegmatite development to the south and west
_____________________________________________________________________________________________________________
Office Address London House, Level 8, 216 St Georges Terrace, PERTH WA 6000 Postal Address GPO Box 2517, PERTH WA 6831
Phone +61 8 9481 0389 Fax +61 8 9463 6103
Email info@estrellaresources.com.au
Estrella Resources Limited (ASX: ESR) (Estrella or the Company) is pleased to announce positive results
of an ongoing lithium review at the Carr Boyd Nickel Project located 80km north-northeast of Kalgoorlie in
Western Australia, the first work program Estrella has undertaken to target pegmatite hosted lithium
potential within the 228 square kilometre land holding.
The review was undertaken due to unsolicited approaches from third parties to evaluate the potential of
Carr Boyd tenure hosting LCT-type pegmatites.
The Carr Boyd Rocks Monzogranite partially intrudes the northern section of the Carr Boyd layered mafic
intrusion. Monzogranites are associated with other Western Australian lithium deposits and this precedence
is an important factor in assessing the positive potential of Estrella’s tenure.
Commenting on the anticipated work program, Estrella Managing Director Chris Daws said:
“While it is only early days in our understanding of what could be a significant pegmatite field located on our
Carr Boyd Ni/Cu mine exploration area, we are nonetheless pleased with the modelling of soil geochemistry
work which highlights the project’s LCT potential.
The Estrella team is at the initial phase of a staged work program to evaluate the lithium prospectivity on our
100% owned tenure. With further work, we hope to ascertain a strong understanding of this possibility which
may eventually lead to generation of lithium targets for drilling.
Importantly, this work does not detract from our efforts at Carr Boyd to find a significant nickel sulphide
deposit but certainly adds upside to our exploration program and I look forward to updating the market on
our progress on both nickel and lithium exploration fronts.”
Associated with the monzogranite is a 9km wide by 14km long area of surficial quartz and pegmatite float
material within alluvial and colluvial sediments (Figure 2). The magnetics and historic drilling within this
area reveal it to be underlain by the Carr Boyd mafic intrusion with pegmatite development within.
A 7km by 3km auger geochemical program conducted by Estrella over the T5-Broonhill contact and
Colreavy Komatiite exploring for nickel partially overlaps the mapped area of sub-crop and float. Modelling
of the lithium, caesium and tantalum results identified mid-level anomalism occurring away from the
monzogranite and into the surrounding pegmatite field. This is seen as a positive indication that the
fractionating pegmatites could produce REE’s within Estrella’s tenure.
Historical drilling is particularly sparce over the eastern gabbroic section of the intrusion. While pegmatites
have been logged - numerous shallow wide-spaced RAB drillholes and shallow costeans which were
subsequently rehabilitated - no relevant assay data is available. A number of consecutive RAB drillholes
by Australian Nickel Mines in 2003 on northing 6,674,960 intersected pegmatite from near surface to end
of hole (see “RAB Section A” included in Figure 2). The holes were not assayed for any REE’s or related
elements. The program was nickel-focussed and no other geological or assay information pertaining to
lithium mineralisation is available. The historic drill chips are no longer visible at surface for re-assay and
holes will require redrilling.
It should be noted that this information simply proves extensive and thick pegmatites exist, however there
is no information as to their prospectivity for LCT minerals at this stage and is not a proxy for laboratory
assay. The rock photographed and shown in Figure 2 represents pegmatite material recovered from old
surface diggings. The megacrystic textured rock is not mineralised, however it shows the system is
fractionating as it moves south and away from the monzogranite. Fractionation is crucial for any LTC model
and the rock shows this to be occurring at Carr Boyd.
Next Steps
A staged approach will be taken firstly to ascertain the LCT potential of the “source granite” and the
geochemistry of the resulting pegmatites along with more detailed field and geochemical investigations. A
second stage of wide spaced geochemistry will be undertaken to determine fractionation patterns and for
broad anomaly generation.
Should these two stages be successful, more closely spaced geochemistry will be undertaken to vector into
areas of lithium anomalism for drilling.
Figure 2: Location of the ESR soil geochemistry survey and lithium-caesium-tantalum anomalism, pegmatites exposed in
historical costeans and drilling, and megachrystic textured pegmatite float material recovered from old diggings
The Board has authorised for this announcement to be released to the ASX.
FURTHER INFORMATION CONTACT
Christopher J. Daws
Managing Director
Estrella Resources Limited
+61 8 9481 0389
info@estrellaresources.com.au
Media:
David Tasker
Managing Director
Chapter One Advisors
E: dtasker@chapteroneadvisors.com.au
T: +61 433 112 936
Forward Looking Statements
This announcement contains certain forward-looking statements which have not been based solely on historical facts
but, rather, on ESR’s current expectations about future events and on a number of assumptions which are subject to
significant uncertainties and contingencies many of which are outside the control of ESR and its directors, officers and
advisers.
Competent Person Statement
The information in this announcement relating to Exploration Results is based on information compiled by Steve Warriner,
who is the Exploration Manager of Estrella Resources, and a member of The Australasian Institute of Geoscientists. Mr.
Warriner has sufficient experience relevant to the style of mineralisation and type of deposit under consideration, and to
the activity he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the “Australasian Code
for Reporting of Exploration Results, Mineral Resource and Ore Reserves”. Mr Warriner consents to the inclusion in the
report of the matters based on their information in the form and context in which it appears.
APPENDIX 1 JORC TABLE 1 - JORC CODE, 2012 EDITION – TABLE 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
• Nature and quality of • Sampling was completed using a 100mm wide auger
techniques
sampling
(e.g.
cut
drill bit mounted on a Toyota Landcruiser 4WD.
channels,
random • Samples were collected from 0.5-1.5m deep auger
chips,
or
specific
holes.
specialised
industry • Spoil from the drill hole was collected and sieved to standard measurement
2mm and placed in Kraft paper Geochem bags then
tools appropriate to the
placed in carboard Geochem boxes for transport and
minerals
under
lab submission.
investigation, such as • No XRF or measurement instruments were used
down hole gamma
sondes or handheld
XRF instruments, etc.).
These examples should
not be taken as limiting
the broad meaning of
sampling.
• Include reference to • Alternating Duplicate, Blank or Standard reference
measures taken to
samples were collected at every 20th sample, inserted
ensure
sample
into the sample sequence and submitted to the labs to
representivity and the
ensure QAQC and sample representivity.
appropriate calibration
of any measurement
tools or systems used.
• Aspects
of
the • Samples were dispatched for laboratory analysis.
determination
of • Determination of element is based on four acid digest
mineralisation that are
laboratory assay results, with samples showing
material to the Public
elevated near neighbour anomalous associations being
Report.
reported.
• In
cases
where • Sampling was completed using a 100mm wide auger
‘industry standard’ work
drill bit mounted on a Toyota Landcruiser 4WD.
has been done this • Samples were collected from 0.5-1.5m deep auger
would be relatively
holes.
simple (e.g. ‘reverse • Spoil from the drill hole was collected and sieved to circulation drilling was
2mm.
used to obtain 1 m • 150g-600g sample (ave. 270g) was collected, placed in
samples from which 3
Kraft paper Geochem bags then placed in carboard
kg was pulverised to
Geochem boxes for transport and lab submission.
produce a 30g charge • Samples were dispatched to a commercial laboratory in
for fire assay’). In other
Perth for analysis.
cases more explanation • Samples were analysed using a 4-acid digest with ICPmay be required, such
AES and ICP-MS finish for 49 multi-elements.
as where there is
coarse gold that has
inherent
sampling
problems.
Unusual
commodities
or
mineralisation
types
(e.g.
submarine
nodules) may warrant
disclosure of detailed
information
Criteria
Drilling
techniques
Drill sample
recovery
Logging
JORC Code explanation
Commentary
• Drill type (e.g. core, • Soil sampling was completed by commercial drilling
reverse
circulation,
contractor Gyro Australia using a 100mm wide auger
open-hole
hammer,
drill bit mounted on a custom-built Toyota Landcruiser
rotary air blast, auger,
4WD auger rig.
Bangka, sonic, etc) and
details
(e.g.
core
diameter,
triple
or
standard tube, depth of
diamond tails, facesampling bit or other
type, whether core is
oriented and if so, by
what method, etc).
• Method of recording • Auger soil samples were ground dumped and intervals
and assessing core and
were tested with acid to ensure a consistent and
chip sample recoveries
favourable soil medium was sampled in each hole.
and results assessed.
• Sample number, GPS location, colour, acid reaction
score, sample depth and surface material type were
• Measures taken to
maximise
sample
digitally recorded at each site.
recovery and ensure • No bias appears to have occurred as all samples were
representative nature of
sieved to -2mm to keep consistency.
the samples.
• Whether a relationship
exists between sample
recovery and grade and
whether sample bias
may have occurred due
to preferential loss/gain
of fine/coarse material.
• Whether core and chip • Sample number, GPS location, colour, acid reaction
samples have been
score, sample depth and surface material type were
geologically
and
digitally recorded at each site.
geotechnically logged • This work is a grass roots exploration method and is not
to a level of detail to
suitable to be used for metallurgical or resource
support
appropriate
estimation works.
Mineral
Resource
estimation,
mining
studies
and
metallurgical studies.
• Whether logging is
qualitative
or
quantitative in nature.
Core
(or
costean,
channel,
etc)
photography.
• The total length and
percentage
of
the
relevant intersections
logged.
Criteria
Sub-sampling
techniques
and sample
preparation
Quality of
assay data
and laboratory
tests
Verification of
sampling and
assaying
JORC Code explanation
• If core, whether cut or
sawn and whether
quarter, half or all core
taken.
• If non-core, whether
riffled, tube sampled,
rotary split, etc and
whether sampled wet or
dry.
• For all sample types,
the nature, quality and
appropriateness of the
sample
preparation
technique.
• Quality
control
procedures adopted for
all sub-sampling stages
to
maximise
representivity
of
samples.
• Measures taken to
ensure
that
the
sampling
is
representative of the insitu material collected,
including for instance
results
for
field
duplicate/second-half
sampling.
• Whether sample sizes
are appropriate to the
grain size of the
material being sampled.
• For geophysical tools,
spectrometers,
handheld
XRF
instruments, etc, the
parameters used in
determining
the
analysis
including
instrument make and
model, reading times,
calibrations
factors
applied
and
their
derivation, etc.
• Nature of quality control
procedures
adopted
(e.g. standards, blanks,
duplicates,
external
laboratory checks) and
whether
acceptable
levels of accuracy (i.e.
lack of bias) and
precision have been
established.
Commentary
• The sample spoil is collected using a rotary auger drill
bit with the spoils being ground dumped prior to scoop
collection of sufficient material to be sized.
• Spoil from the drill hole was collected and sieved to 2mm with 150g-600g sample weight (ave. 270g)
collected from each sample site.
• Alternating Duplicate, Blank or Standard reference
samples were collected at every 20th sample, inserted
into the sample sequence and submitted to the labs to
ensure QAQC and sample representivity.
• Sample sizes are appropriate to the grain size of the
mineralisation.
• The
verification
of
significant intersections
by either independent
or alternative company
personnel.
• Results are within expected ranges for this style of
sampling
• No results from geophysical tools are being reported.
• Samples were dispatched to a commercial laboratory in
Perth for analysis.
• Samples were analysed using a 4-acid digest with ICPAES and ICP-MS finish for 49 multi-elements.
• Alternating Duplicate, Blank or Standard reference
samples were collected at every 20th sample, inserted
into the sample sequence and submitted to the labs to
ensure QAQC and sample representivity.
• QAQC results are within expected ranges for this style
of sampling
Criteria
Location of
data points
Data spacing
and
distribution
Orientation of
data in relation
to geological
structure
Sample
security
JORC Code explanation
• The use of twinned
holes.
• Documentation
of
primary data, data entry
procedures,
data
verification,
data
storage (physical and
electronic) protocols.
• Discuss any adjustment
to assay data.
• Accuracy and quality of
surveys used to locate
drill holes (collar and
down-hole
surveys),
trenches,
mine
workings and other
locations
used
in
Mineral
Resource
estimation.
• Specification of the grid
system used.
• Quality and adequacy
of topographic control.
Commentary
• Duplicate holes were drilled at every 60th sample
location.
• The data was collected and digitally logged into a data
logger. The data was delivered and checked in Excel
Spread sheets. Data was validated, merged and
processed using Micromine software.
• Data
spacing
for
reporting of Exploration
Results.
• Whether
the
data
spacing and distribution
is sufficient to establish
the degree of geological
and grade continuity
appropriate for the
Mineral Resource and
Ore Reserve estimation
procedure(s)
and
classifications applied.
• Whether
sample
compositing has been
applied
• Whether the orientation
of sampling achieves
unbiased sampling of
possible structures and
the extent to which this
is known, considering
the deposit type.
• If
the
relationship
between the drilling
orientation and the
orientation
of
key
mineralised structures
is considered to have
introduced a sampling
bias, this should be
assessed and reported
if material.
• The measures taken to
ensure sample security.
• Drilling was completed on 100x 200m over known
mineralisation and 200x400m spacings for the
remainder
• Not applicable, no Mineral Resource is being stated.
• No adjustments have been made to the assay data.
• The holes were located and recorded by the auger rig
operator using a vehicle mounted GPS unit to + 3m.
• The rig was setup over or as close as possible to the
nominated hole position and final GPS pickup occurred
at the completion of the hole.
• MGA94_51
• Topographic control is well within expected ranges for
this style of sampling.
• No compositing has been applied. Only one sample per
hole was collected.
• All holes were shallow and drilled vertical looking only
at the near surface anomalism.
• Samples were collected by Gyro Australia and
transported directly to SGS labs in Kalgoorlie which
were then transported via courier to SGS in Perth
Criteria
Audits or
reviews
JORC Code explanation
• The results of any
audits or reviews of
sampling
techniques
and data.
Commentary
• No audits or reviews have been conducted for this
release given the grass roots nature of the sampling
technique.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral
• Type,
reference
name/number, • Estrella Resources through it 100%
tenement and
location and ownership including
owned subsidiary Carr Boyd Nickel Pty
land tenure
agreements or material issues with
Ltd, holds a 100% interest in the project.
status
third parties such as joint ventures, • There are no known impediments to
partnerships, overriding royalties,
operate in the area.
native title interests, historical sites,
wilderness or national park and
environmental settings.
• The security of the tenure held at the
time of reporting along with any known
impediments to obtaining a licence to
operate in the area.
Exploration
• Acknowledgment and appraisal of • The Carr Boyd Rocks deposit was
done by other
exploration by other parties.
discovered by Great Boulder Mines, in a
parties
joint venture with North Kalgurli Ltd in
1968. The deposit was mined between
1972 and 1975, during which time they
explored for additional breccia pipe
occurrences near the mine.
• WMC acquired Great Boulder Mines Ltd
in 1975, briefly reopening the mine in
1977 before closing it permanently
shortly thereafter due to a collapse in the
nickel price. The mine had produced
210,000t at 1.44% Ni and 0.46% Cu
before its closure.
• From 1968 Pacminex Pty Ltd held most
of the ground over the CBLC outside of
the immediate mine area. Between 1968
and 1971 they conducted extensive
exploration programs searching for large
basal contact and/or strata bound Ni-Cu
deposits. It was during this time that most
of the disseminated and cloud sulphide
occurrences such as those at Tregurtha,
West Tregurtha and Gossan Hill were
discovered.
• Defiance Mining acquired the regional
tenements from Pacminex in 1987 and
focused on exploration for PGE deposits
between 1987 and 1990.
In 1990
Defiance purchased the Carr Boyd Rocks
mine from WMC and switched focus to
the mine area between 1990 and 2001,
leaving many PGE targets untested.
• From 1990 Defiance dewatered the mine
to conduct test work and feasibility
studies on the remnant mineralisation.
Metallurgical test work, Mineral Resource
estimations, and scoping studies were
completed.
Around 1996 the focus
shifted again to regional exploration for
large tonnage basal contact deposits.
Criteria
JORC Code explanation
Geology
• Deposit type, geological setting and
style of mineralisation.
Commentary
• In 2001 Titan Resources Ltd (Titan)
acquired the project and recommenced
economic evaluations of the remnant
material at Carr Boyd Rocks before
embarking
on
another
regional
exploration program focusing on the
basal contact. An aeromagnetic survey,
airborne EM reprocessing, and several
programs of RAB and RC drilling were
completed.
• From 2005 Yilgarn Mining entered a JV
with Titan and continued with some
regional exploration but focused most
attention in and around the Carr Boyd
Rocks mine.
• In 2007 Titan was acquired by
Consolidated Minerals Ltd (Consmin).
Consmin conducted IP surveys and
detailed gravity surveys but did not drill
any targets before selling the project to
Salt Lake Mining (SLM) in 2013. SLM
completed limited drilling to meet
expenditure commitments, before selling
the project to Apollo Phoenix Resources
in 2016.
• The Carr Boyd project lies within the
Achaean Yilgarn Craton in a 700km belt
of elongate deformed and folded mafic,
ultramafic rocks and volcanic sediments
intruded by granitoids which is referred to
as the Norseman-Wiluna Belt. The belt
has been divided into several geological
distinct terranes, with the project area
lying at the northern end of the Gindalbie
terrane (Swager, 1996).
• The geology of the Carr Boyd area is
dominated by the Carr Boyd layered
mafic-ultramafic
intrusive
complex
(CBLC). This layered intrusive covers an
area of 17 km by 7km and has intruded
into an Achaean Greenstone/Granite
succession. The CBLC is comprised of a
basal sequence of dunite’s, which are
overlain by peridotites / pyroxenites and
above that by gabbro’s. The intrusion has
been interpreted to have been tilted to the
east with the geometry of the intrusive
further
complicated
by
regional
deformation and folding. The sequence
has been metamorphosed to upper
greenschist to lower amphibolite facies.
• Several distinctive styles of Ni and Ni-Cu
mineralisation have been identified within
the CBLC. At the Carr Boyd Rocks Nickel
Mine Ni-Cu mineralisation is hosted
within several 20 - 60m diameter
brecciated pipe-like bodies that appear to
be discordant to the magmatic
stratigraphy. Mineralisation is hosted by a
matrix
of
sulphides
(pyrrhotite,
pentlandite, pyrite and chalcopyrite)
within brecciated Bronzite and altered
Criteria
JORC Code explanation
Commentary
country rock clasts.
• Stratiform Ni-Cu-PGE mineralisation has
been identified within the basal parts and
at shallower stratigraphic levels of the
complex. The presence of Ni-Cu-PGE
mineralisation
within
multiple
stratigraphic positions and of several
unique styles of mineralisation highlights
the potential of the CBLC for hosting a
substantial Ni-Cu deposit.
Drill hole
Information
• A summary of all information material
to the understanding of the exploration
results including a tabulation of the
following information for all Material
drill holes:
o
easting and northing of the drill
hole collar
o
elevation or RL (Reduced
Level – elevation above sea
level in metres) of the drill hole
collar
o
dip and azimuth of the hole
o
down
hole
length
and
interception depth
o
hole length.
• If the exclusion of this information is
justified on the basis that the
information is not Material and this
exclusion does not detract from the
understanding of the report, the
Competent Person should clearly
explain why this is the case.
• 536 shallow (0.5-1.5m) auger drill
samples were collected and are plotted
on Fig 1.
• This produced an extensive sample
location table which is not practical to
publish.
• The information is not material and does
not detract from the details presented in
the attached report due to the low-level
geochemical nature of the auger soil
sampling program.
• The generated results are for targeting
purposes and are not indicative that ore
grade mineralisation exists within/below
the generated geochemical target zones.
Data
aggregation
methods
• In reporting Exploration Results,
weighting
averaging
techniques,
maximum and/or minimum grade
truncations (e.g. cutting of high grades)
and cut-off grades are usually Material
and should be stated.
• Where
aggregate
intercepts
incorporate short lengths of high-grade
results and longer lengths of low-grade
results, the procedure used for such
aggregation should be stated and
some typical examples of such
aggregations should be shown in
detail.
• The assumptions used for any
reporting of metal equivalent values
should be clearly stated.
• These relationships are particularly
important in the reporting of
Exploration Results.
• Pathfinder vector maps were generated
using Inverse Distance gridding function
in Micromine Software. The gridding
method assessed a maximum of 100
points within a 400 search radius window.
• No cutting of grades was applied.
Relationship
between
mineralisation
• No metal equivalents are used in this
announcement however vector formulas
are shown on the provided images.
• The generated results are for targeting
purposes and are not indicative that ore
grade mineralisation exists within/below
Criteria
widths and
intercept
lengths
JORC Code explanation
• If the geometry of the mineralisation
with respect to the drill hole angle is
known, its nature should be reported.
• If it is not known and only the down
hole lengths are reported, there should
be a clear statement to this effect (e.g.
‘down hole length, true width not
known’).
• Appropriate maps and sections (with
scales) and tabulations of intercepts
should be included for any significant
discovery being reported. These
should include, but not be limited to a
plan view of drill hole collar locations
and appropriate sectional views.
Commentary
the generated geochemical target zones.
• Widths and lengths of potential
underlying
intercepts
cannot
be
determined at this early stage.
Balanced
reporting
• Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low
and high grades and/or widths should
be practiced to avoid misleading
reporting of Exploration Results.
Other
substantive
exploration
data
• Other exploration data, if meaningful
and material, should be reported
including (but not limited to): geological
observations; geophysical survey
results; geochemical survey results;
bulk samples – size and method of
treatment; metallurgical test results;
bulk
density,
groundwater,
geotechnical and rock characteristics;
potential deleterious or contaminating
substances.
• The nature and scale of planned
further work (e.g. tests for lateral
extensions or depth extensions or
large-scale step-out drilling).
• Diagrams clearly highlighting the areas
of possible extensions, including the
main geological interpretations and
future drilling areas, provided this
information is not commercially
sensitive.
• 536 auger samples plus 28 QAQC
samples were collected and each
analysed for 49 elements.
• This produced an extensive spread sheet
which is not practical to publish.
• The results are low-level pathfinder
geochemical assays and not ore grades.
• The low-level nature of the results and in
the manner they have been presented is
deemed adequate and is not deemed
misleading if not reported in their entirety.
• Everything meaningful and material is
disclosed in the body of the report.
• Geochemical observations are included
in the report.
• No bulk samples, metallurgical, bulk
density,
groundwater,
geotechnical
and/or rock characteristics test were
carried out.
• There are no known potential deleterious
or contaminating substances.
Diagrams
Further work
• Appropriate maps and photos
included in the body of the Report.
are
• Additional geochemical auger sampling
over the tenure is warranted.
Share your feedback
Discover