High Grade Lithium Discovered at Surface Mt Edwards Lithium
Released
Released
Announcement PDF
21 November 2016
ASX ANNOUNCEMENT
HIGH GRADE LITHIUM DISCOVERED AT SURFACE
MT EDWARDS LITHIUM PROJECT
HIGHLIGHTS
Highly encouraging results from Phase II rock chip sampling, with assays up to 2.24% Li2O at the
newly discovered “Atomic Three” prospect
Nine samples returned over 200ppm Li2O, adding to the existing high priority drill targets
A high density cluster of pegmatites located at Atomic Three, which is emerging as a very high
priority target area
MELP prospects rapidly expanding in size and number through methodical exploration programs
Figure 1. Hand specimen from the MEL0024 sample site, Atomic Three prospect, which returned 2.24% Li2O
Estrella Resources Limited (ASX:ESR) (Estrella or the Company), is pleased to announce the results of Phase
II rock chip sampling by Mt Edwards Lithium Pty Ltd on the Mt Edwards Lithium Project (MELP). Estrella will
hold 75% of the lithium rights to a group of tenements held by Apollo Phoenix Resources Limited (which holds
the remaining 25% of the lithium rights) upon completion of the MELP acquisition (refer to ASX release by
th
ESR 7 November 2016).
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia
Phone +61 2 9078 7671 Email info@estrellaresources.com.au
PHASE II ROCK CHIP RESULTS
Assay results for the Phase II rock chip sampling program have been received and the results are highly
encouraging. Nine samples returned over 200ppm Li2O, representing new high priority drill targets. Another
three samples returned over 100ppm Li2O, representing second order targets for follow-up sampling. One
stand-out result from the newly named Atomic Three prospect returned 2.24% Li2O.
As mentioned in previous announcements, an estimated 40% of the known outcropping pegmatite
occurrences on the MELP remain untested for lithium. The remaining pegmatites will be systematically
sampled during future fieldwork programs.
Table 1. Rock chip sampling details. NA means Not Assayed and BD means Below Detection.
Sample_ID
Zone
East
36739
51J 360580
36740
51J 360533
36741
51J 360513
36742
51J 359779
36743
51J 359727
36744
51J 360668
36748
51J 358261
36749
51J 358116
36750
51J 357981
36751
51J 357933
36752
51J 357915
36753
51J 357519
36754
51J 357519
36755
51J 357548.2
36757
51J 356050
36758
51J 356050
36759
51J 355682
36760
51J 360318
Munda Grab Sample (Bulk) 51J 360564.5
Munda Grab Sample (Pink) 51J 360562.9
MEL0002
51J 360782
MEL0003
51J 360851
MEL0004
51J 360798
MEL0005
51J 359468
MEL0006
51J 359540
MEL0007
51J 358636
MEL0008
51J 358653
MEL0009
51J 358574
MEL0010
51J 358563
MEL0011
51J 357969
MEL0012
51J 358443
MEL0013
51J 358071
MEL0014
51J 357603
MEL0015
51J 360698
MEL0016
51J 360751
MEL0017
51J 360732
MEL0018
51J 360758
MEL0019
51J 358861
MEL0020
51J 358854
MEL0021
51J 358910
MEL0022
51J 356549
MEL0023
51J 361046
MEL0024
51J 360946
MEL0025
51J 361088
North
6513865
6513867
6513863
6514410
6514722
6514689
6514378
6514264
6514448
6514680
6514683
6514674
6514674
6514855
6516818
6516818
6516990
6516518
6513714
6513717
6514133
6514540
6514517
6514494
6514474
6513648
6513542
6513774
6513799
6513671
6510874
6511048
6514828
6516302
6516030
6516110
6516143
6518600
6518375
6518100
6517587
6519744
6519692
6519971
RL
377.3305
374.8501
374.7665
373.7617
368.8717
369.6758
361.5311
362.3623
359.5829
354.8893
354.3996
347.1887
347.1887
347.2026
361.8765
361.8765
364.0088
363.6057
380
380
363.2725
363.2443
364.1181
372.4431
374.0265
363.028
365.4653
359.7336
359.5058
354.1269
324.4362
332.9713
347.2584
367.1941
369.3803
368.7843
368.5767
357.738
359.3091
362.6401
370.365
378.4466
368.7632
373.3305
B_ppm
<20
<20
<20
<20
<20
<20
<20
<20
<20
<20
<20
<20
<20
<20
<20
<20
125
25
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Li_ppm
1020
1230
75
15
280
60
<10
15
120
70
475
25
20
360
25
<10
<10
155
NA
NA
70
BD
BD
175
490
200
265
230
275
65
20
10
35
30
BD
BD
70
165
35
15
BD
80
10400
215
Nb_ppm Ta_ppm Li2O_ppm Comments
140
20
2196
Phase I
70
10
2648
Phase I
70
10
161
Phase I
<10
<10
32
Phase I
120
15
603
Phase I
65
20
129
Phase I
30
15
11
Phase I
25
25
32
Phase I
85
10
258
Phase I
125
35
151
Phase I
75
10
1023
Phase I
15
<10
54
Phase I
<10
<10
43
Phase I
60
15
775
Phase I
30
<10
54
Phase I
<10
<10
11
Phase I
<10
<10
11
Phase I
60
105
334
Phase I
NA
NA
33680
Phase I
NA
NA
20490
Phase I
105
95
151
Phase II
140
85
BD
Phase II
60
40
BD
Phase II
115
30
377
Phase II
55
BD
1055
Phase II
20
BD
431
Phase II
485
55
571
Phase II
85
10
495
Phase II
210
20
592
Phase II
15
BD
140
Phase II
30
BD
43
Phase II
50
BD
22
Phase II
15
BD
75
Phase II
70
25
65
Phase II
BD
BD
BD
Phase II
60
25
BD
Phase II
75
35
151
Phase II
15
BD
355
Phase II
15
BD
75
Phase II
20
BD
32
Phase II
10
BD
BD
Phase II
75
110
172
Phase II
105
185
22391
Phase II
55
75
463
Phase II
Highly anomalous result requiring follow-up drill testing
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia
Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Figure 2. Map showing sample locations and results from Phase I and Phase II sampling. Results are in ppm unless stated
otherwise. BD means Below Detection.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia
Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Figure 3. MEL0024 rock chip sample location.
ATOMIC THREE PROSPECT
2
This new high priority prospect is an area of about 1km where there is a particularly high density of pegmatite
bodies. There are over 40 pegmatite occurrences in the area and only three of them sampled so far. All three
samples were anomalous and one, MEL0024, returned a highly anomalous result from a surface sample of
2.24% Li2O.
This is a good example of the high prospectivity of the MELP and shows how much work is required to fully
assess its potential. Mt Edwards Lithium is working methodically through the most highly ranked targets in
st
preparation for drill testing in the 1 Quarter of the 2017 Calendar Year.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia
Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Figure 4. Map of the Atomic Three prospect showing the three rock chip samples collected and the dense cluster of unsampled
pegmatites. Results are in ppm unless stated otherwise. BD means Below Detection.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia
Phone +61 2 9078 7671 Email info@estrellaresources.com.au
ABOUT THE MELP
2
The MELP consists of 16 tenements covering over 127km on the highly prospective Widgiemooltha Dome. It
is located centrally within what is emerging as a highly endowed and globally significant lithium province.
The MELP location in relation to the other significant LCT pegmatite projects in the province is as follows:
2km east of the recent Goldfields Lithium Alliance (GLIA) Widgiemooltha project acquisition
2km south of Maximus Resources’ recent “high grade lithium discovery” at Spargoville
40km south of the Mt Marion Lithium project
40km SSE of the Londonderry Pegmatites and Lithium Australia’s Lithium Hill project
60km west of the Bald Hill Sn-Ta-Li project and Tawana Resources’ Cowan project
30km north of Pioneer Resources Limited Pioneer Dome Lithium project
Figure 5. Location of the MELP in relation to other significant LCT pegmatite projects in the region.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia
Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Table 2. Tenement Schedule.
Schedule of Mining and Exploration Tenements
Country
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
State/Region
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Tenement ID
M15/698
M15/75
M15/699
M15/87
M15/74
M15/101
M15/99
M15/653
M15/97
M15/96
M15/102
M15/100
M15/1271
E15/1505
E15/1507
E15/1562
Area Km2
4.2
5.7
3.4
3.6
9.3
9.6
9.8
10
6.8
8.4
9.3
9.6
4.8
2
15
16
Grant Date
22/12/1994
10/11/1984
23/12/1994
26/07/1984
10/11/1984
23/07/1984
23/07/1984
28/01/1993
23/07/1984
23/07/1984
4/01/1985
23/07/1984
2/07/2007
5/10/2016
Application
Application
Interest %
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
For more information, please contact:
Ray Shorrocks info@estrellaresources.com.au
Competent Person Statement
The information in this announcement that relates to Exploration Results, Mineral Resources or Ore Reserves is based on
information compiled by Luke Marshall, who is a consultant to Apollo Phoenix Resources and Mt Edwards Lithium, and a
member of The Australasian Institute of Geoscientists. Mr Marshall has sufficient experience that is relevant to the style of
mineralisation and type of deposit under consideration and to the activity that he is undertaking to qualify as a Competent
Person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resource
and Ore Reserves”. Mr Marshall consents to the inclusion in the report of the matters based on his information in the form
and context in which it appears.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia
Phone +61 2 9078 7671 Email info@estrellaresources.com.au
APPENDIX 3 JORC TABLE 1 - JORC CODE, 2012 EDITION – TABLE 1 MELP
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Sampling
Nature and quality of sampling (e.g. cut
techniques
channels, random chips, or specific specialised
industry standard measurement tools
appropriate to the minerals under investigation,
Commentary
The samples reported in this document are rock chip grab samples collected at surface
from outcropping pegmatite occurrences.
This involved taking a random grab sample of approximately 3kg using a geological
hammer and numbered calico bag.
such as down hole gamma sondes, or handheld
XRF instruments, etc.). These examples should
not be taken as limiting the broad meaning of
sampling.
These rock chip samples should not be considered to be representative samples of the
pegmatite occurrences.
Drill testing is required to collect representative sample data through the pegmatites.
Samples were analysed by an industry standard crush and grind prep, a 4 acid digest and
ICP-MS or ICP-OES finish depending on the element being analysed.
Include reference to measures taken to ensure
sample representivity and the appropriate
No measures have been taken to ensure sample representivity at this stage as the project
is in the very early stages of assessment.
calibration of any measurement tools or systems
used.
Aspects of the determination of mineralisation
that are material to the Public Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple (e.g.
‘reverse circulation drilling was used to obtain 1
No determinations were made in this regard. Pegmatite occurrences were sampled and
assayed regardless of determination with regard to mineralisation.
Rock chip samples were collected using a geological hammer and a calico bag to achieve
a random grab sample.
These samples are not considered to be representative of the pegmatites.
m samples from which 3 kg was pulverised to
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
JORC Code explanation
produce a 30 g charge for fire assay’). In other
Commentary
cases more explanation may be required, such
as where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (e.g. submarine nodules)
may warrant disclosure of detailed information
Drilling
techniques
Drill type (e.g. core, reverse circulation, open-
Not applicable, no drill results are being reported.
hole hammer, rotary air blast, auger, Bangka,
sonic, etc.) and details (e.g. core diameter, triple
or standard tube, depth of diamond tails, facesampling bit or other type, whether core is
oriented and if so, by what method, etc.).
Drill sample
recovery
Method of recording and assessing core and
Not applicable, no drill results are being reported.
chip sample recoveries and results assessed.
Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias
may have occurred due to preferential loss/gain
of fine/coarse material.
Logging
Whether core and chip samples have been
geologically and geotechnically logged to a level
A log was collected for each sample which included sample location, sample type, date
sampled and sample condition.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
JORC Code explanation
of detail to support appropriate Mineral Resource
Commentary
estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc.)
photography.
The total length and percentage of the relevant
intersections logged.
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary
split, etc. and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
Not applicable, no drill results are being reported.
Not applicable, no drill results are being reported.
Sample condition field to record moisture and sample recovery is included in the sampling
log sheet and populates the assay table of the database.
Sample preparation is considered to be appropriate for rock chip sampling as per industry
standard practices.
technique.
Quality control procedures adopted for all sub-
No quality control procedures have been undertaken other than the laboratory’s own
internal QAQC check and procedures.
sampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
Sample sizes may not be appropriate to the grain size of the material being sampled.
Grain sizes of the pegmatites varied from 4mm to 25mm.
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
JORC Code explanation
Whether sample sizes are appropriate to the
Commentary
grain size of the material being sampled.
Quality of
assay data
and
laboratory
tests
For geophysical tools, spectrometers, handheld XRF instruments,
etc., the parameters used in determining the analysis including
instrument make and model, reading times, calibrations factors
applied and their derivation, etc.
No QAQC procedures have been put in place for the MELP given the
very early stage of assessment.
No geophysical methods or hand-held XRF units have been used for
determination of grades in this announcement.
Nature of quality control procedures adopted (e.g. standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (i.e. lack of bias) and precision have been established.
Verification
of sampling
and
assaying
The verification of significant intersections by either independent or
Not applicable, no intersections are being reported.
alternative company personnel.
The use of twinned holes.
Not applicable, no drill results are being reported.
Documentation of primary data, data entry procedures, data
Drill hole data were sourced from digital sources and original hard-
verification, data storage (physical and electronic) protocols.
copy sampling and assay records, and imported into a central
electronic database. Datashed software is used to validate and
manage the data.
Location of
data points
Discuss any adjustment to assay data.
Li2O was calculated as Li x 2.153.
Accuracy and quality of surveys used to locate drill holes (collar and
Rock chip sample locations were recorded by handheld GPS.
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Data spacing
and
distribution
Specification of the grid system used.
Original surveying was undertaken in MGA94 zone 51.
Quality and adequacy of topographic control.
Topographic control is considered more than adequate for the results
being reported.
Data spacing for reporting of Exploration Results.
These are random rock chip sampled with no regular data spacing.
Whether the data spacing and distribution is sufficient to establish the
Not applicable, no mineral resource or ore reserve is being reported.
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and
classifications applied.
Orientation
of data in
relation to
geological
structure
Whether sample compositing has been applied
Not applicable for random rock chips.
Whether the orientation of sampling achieves unbiased sampling of
Not applicable, these are spot samples.
possible structures and the extent to which this is known, considering
Not applicable, no drilling is being reported.
the deposit type.
If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
Sample
security
The measures taken to ensure sample security.
Samples were submitted to the SGS Kalgoorlie laboratory by Apollo
Phoenix Resources. Sample security was ensured up to this point as
the samples were always in the presence of Apollo staff.
Audits or
reviews
The results of any audits or reviews of sampling techniques and data.
No audits or reviews have been undertaken on the samples being
reported due to the small number of samples in the dataset.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Mineral
Type, reference name/number, location and ownership including
tenement and
agreements or material issues with third parties such as joint
land tenure
status
ventures, partnerships, overriding royalties, native title interests,
Commentary
Apollo Phoenix Resources (25%) and Mt Edwards Lithium (75%)
hold a combined 100% interest the lithium rights to the project.
There are no known impediments to operate in the area.
historical sites, wilderness or national park and environmental
settings.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
Exploration
done by other
parties
Acknowledgment and appraisal of exploration by other parties.
Exploration has been undertaken by previous holders, but
predominantly Western Mining Corporation (WMC) during the 1980s
and Titan Resources from 2001. Consolidated Minerals took over
Titan in 2006. No mining for Li has been undertaken on the project.
Geology
Deposit type, geological setting and style of mineralisation.
The geology at MELP consists of a mafic-ultramafic belt bound to the
east by metasediments and to the west by granites.
The mineralisation at MELP consists of pegmatite swarms in
greenstone belts at some distance from their parent granites.
The lithium baring minerals identified to date are spodumene and
accessory lepidolite.
Depth of complete oxidation varies from 10 to 80 metres below the
natural surface but is typically around 40 metres.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
Drill hole
Information
JORC Code explanation
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information
Commentary
No drill results are reported in this announcement.
No information is excluded.
for all Material drill holes:
o
easting and northing of the drill hole collar
o
elevation or RL (Reduced Level – elevation above sea
level in metres) of the drill hole collar
o
dip and azimuth of the hole
o
down hole length and interception depth
o
hole length.
If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should clearly
explain why this is the case.
Data
aggregation
methods
In reporting Exploration Results, weighting averaging techniques,
Not applicable for rock chip sampling.
maximum and/or minimum grade truncations (e.g. cutting of high
grades) and cut-off grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low grade results, the procedure used
for such aggregation should be stated and some typical examples of
such aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent values
No metal equivalents are used.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
JORC Code explanation
should be clearly stated.
Commentary
Relationship
between
mineralisation
widths and
intercept
lengths
These relationships are particularly important in the reporting of
Not applicable for random rock chip grab samples.
Exploration Results.
If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (e.g. ‘down hole length, true
width not known’).
Diagrams
Appropriate maps and sections (with scales) and tabulations of
Appropriate maps and tables are included in the body of the Report.
intercepts should be included for any significant discovery being
reported. These should include, but not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
Balanced
reporting
Where comprehensive reporting of all Exploration Results is not
This is not a large enough dataset to ensure balanced reporting.
practicable, representative reporting of both low and high grades
and/or widths should be practiced to avoid misleading reporting of
Exploration Results.
Other
substantive
exploration
data
Other exploration data, if meaningful and material, should be
reported including (but not limited to): geological observations;
geophysical survey results; geochemical survey results; bulk samples
– size and method of treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock characteristics; potential
Pegmatite occurrences were identified from historic detailed
geological mapping and then confirmed by ground checking.
Geological observations are included in the report. All core drilled at
MELP is available for review and is stored at the Fisher mine offices
in Kambalda.
deleterious or contaminating substances.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Criteria
JORC Code explanation
Commentary
Metallurgical test work is out of the scope of this report.
Multi-element assay suites have been analysed for all but two
samples.
Further work
The nature and scale of planned further work (e.g. tests for lateral
extensions or depth extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling areas,
Further field confirmation and rock chip sampling is planned,
followed by drill testing of the most anomalous pegmatites.
The presence of possible extensions cannot be determined at this
stage.
provided this information is not commercially sensitive.
Office Address Suite 1503B Level 15, 1 Alfred Street New South Wales 2000 Australia Postal Address PO Box R933 Royal Exchange New South Wales 1225 Australia Phone +61 2 9078 7671 Email info@estrellaresources.com.au
Share your feedback
Discover