Mt Edwards Lithium Project Exploration Update
Released
Released
Announcement PDF
23 June 2017
ASX ANNOUNCEMENT
NEW OUTCROPPING HIGH-GRADE LITHIUM DISCOVERED AT ATOMIC THREE
HIGHLIGHTS
Results of a third phase of rock chip sampling at Atomic three has identified at least four new high-grade
lithium occurrences
The new occurrences “Bravo Cluster” and “Charlie Pegmatite” will be follow-up sampled and mapped
in detail before drill testing as soon as possible
Rock chip sampling and soil sampling ongoing at Atomic Three to identify other lithium occurrences
POW approval granted for the drilling of two twin holes of pegmatite intersections near 132N
Figure 1. Photo of the outcrop at sample site AP00414, Charlie Pegmatite, which returned 2.26% Li2O.
Estrella Resources Limited (ASX: ESR) (Estrella or the Company) is pleased to inform shareholders that recent
rock chip sampling has identified four new high-grade lithium bearing pegmatites at Atomic Three. The sampling is
part of systematic and ongoing mapping, rock chip sampling, and soil sampling programs.
ONGOING WORK AT ATOMIC THREE
A systematic rock chip sampling program over the Atomic Three target area to test all the remaining outcropping
pegmatites for lithium and associated elements has been completed. The program has shown that several of the
mapped pegmatites in the area host high grade lithium mineralisation. It has also identified new high-grade lithium
bearing pegmatites not picked up by previous mapping. These new targets, “Bravo Cluster” and “Charlie Pegmatite”
represent high priority targets for drill testing in the upcoming RC drill program.
Soil sampling is underway along strike to the north and south of Atomic Three where there are less outcropping
pegmatites. This will determine if there are blind lithium bearing pegmatites in these areas, which do not outcrop.
As discussed in previous announcements, diamond holes WD4133, which intersected 78.8m of pegmatite from
56.7m downhole and WD5301, which intersected 37.7m of pegmatite from 132.6m downhole will be twinned with
RC holes in the upcoming drill program.
BRAVO CLUSTER
The Bravo Cluster is located approximately 600m NNW of the 132N nickel mine, or 250m SW of the Alpha
Pegmatite targeted by the first phase of drilling on the MELP. Six rock chip samples have been collected at
Bravo Cluster, five of which returned over 0.15% Li2O. Three samples returned over 1.5% Li2O, with a peak
value of 1.68% Li2O. Two of the samples were collected from pegmatites not picked up by existing mapping.
Detailed mapping and follow-up sampling is underway on the prospect. This will determine the surface extent of
the pegmatite swarm and locate the best positions to target drillholes, which will be incorporated into the
upcoming drill program.
CHARLIE PEGMATITE
The Charlie Pegmatite is located approximately 200m E of the Bravo Cluster. A single rock chip sample was
collected from a previously unmapped pegmatite, returning 2.26% Li2O.
Detailed mapping and follow-up sampling is underway on the prospect. This will determine the surface extent of
the pegmatite, determine if there are any other prospective pegmatites in the area, and locate the best positions
to target drillholes which will be incorporated into the upcoming drill program.
Figure 2. Photo of a hand specimen collected at Charlie Pegmatite during follow-up sampling. The sample is approximately 10cm
across.
Figure 2. Map of the Atomic Three prospect showing all of the rock chips sampled to date, labelled with % Li2O for anomalous
results above 0.1% Li2O. Note the very high grades returned from the Bravo Cluster and the Charlie Pegmatite, which will
be mapped in detail, follow-up sampled, and targetted for drilling.
ABOUT THE MELP
The MELP consists of 16 tenements covering over 127km2 on the highly prospective Widgiemooltha Dome. It is
located centrally within what is emerging as a highly endowed and globally significant lithium province.
The MELP location in relation to the other significant LCT pegmatite projects in the province is as follows:
2km east of the recent Goldfields Lithium Alliance (GLIA) Widgiemooltha project acquisition
40km south of the Mt Marion Lithium project
40km SSE of the Londonderry Pegmatites and Lithium Australia’s Lithium Hill project
60km west of the Bald Hill Sn-Ta-Li project and Tawana Resources’ Cowan project
30km north of Pioneer Resources Limited Pioneer Dome Lithium project
Figure 4. Location of the MELP in relation to other significant LCT pegmatite projects in the region.
Table 1. Tenement Schedule
Schedule of Mining and Exploration Tenements
Country
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
State/Region
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
WA
Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Mt Edwards Lithium Project
Tenement ID
M15/698
M15/75
M15/699
M15/87
M15/74
M15/101
M15/99
M15/653
M15/97
M15/96
M15/102
M15/100
M15/1271
E15/1505
E15/1507
E15/1562
Area Km2
4.2
5.7
3.4
3.6
9.3
9.6
9.8
10
6.8
8.4
9.3
9.6
4.8
2
15
16
Grant Date
22/12/1994
10/11/1984
23/12/1994
26/07/1984
10/11/1984
23/07/1984
23/07/1984
28/01/1993
23/07/1984
23/07/1984
4/01/1985
23/07/1984
2/07/2007
5/10/2016
Application
Application
Interest %
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
Table 2. Recent rock chip sampling details.
Sample_ID
Zone
East
North
RL
Li_ppm
Cs_ppm
Ta_ppm
Rb_ppm
Li2O_ppm
Comments
AP00357
51J
360742
6520207
377
60
72
30
640
129
Phase III
AP00358
51J
360867
6520777
362
15
62
<10
368
32
Phase III
AP00359
51J
360910
6520808
360
75
24
<10
410
161
Phase III
AP00360
51J
360915
6520820
360
160
12
<10
31
344
Phase III
AP00361
51J
360930
6520853
360
35
10
<10
26
75
Phase III
AP00362
51J
360950
6520856
360
20
24
<10
215
43
Phase III
AP00363
51J
360987
6520852
360
65
8
10
77
140
Phase III
AP00364
51J
360917
6520727
360
20
13
<10
16
43
Phase III
AP00365
51J
360987
6520777
360
100
47
<10
630
215
Phase III
AP00366
51J
360976
6520797
360
95
23
<10
204
205
Phase III
AP00367
51J
361003
6520872
360
55
21
<10
268
118
Phase III
AP00368
51J
361010
6520869
360
145
47
10
397
312
Phase III
AP00369
51J
360894
6520736
360
55
28
<10
147
118
Phase III
AP00370
51J
360903
6520686
360
45
156
10
487
97
Phase III
AP00371
51J
360889
6520664
360
165
118
50
707
355
Phase III
AP00372
51J
360831
6520680
360
225
252
45
1770
484
Phase III
AP00373
51J
360827
6520677
360
1110
225
50
2030
2390
Phase III
AP00374
51J
360970
6520811
360
120
41
<10
531
258
Phase III
AP00375
51J
360995
6520769
360
110
33
<10
377
237
Phase III
AP00376
51J
361037
6520779
360
140
43
<10
571
301
Phase III
AP00377
51J
361044
6520788
360
140
48
<10
632
301
Phase III
AP00378
51J
361090
6520792
360
55
33
<10
506
118
Phase III
AP00379
51J
360524
6520414
360
105
122
10
769
226
Phase III
AP00380
51J
360579
6520384
360
130
94
15
908
280
Phase III
AP00381
51J
360620
6520390
360
735
176
20
1050
1582
Phase III
AP00382
51J
360593
6520389
360
390
162
20
1230
840
Phase III
AP00383
51J
360682
6520289
360
105
72
20
816
226
Phase III
Sample_ID
Zone
East
North
RL
Li_ppm
Cs_ppm
Ta_ppm
Rb_ppm
Li2O_ppm
Comments
AP00384
51J
360686
6520281
360
105
78
15
979
226
Phase III
AP00385
51J
360685
6520253
360
55
41
10
422
118
Phase III
AP00386
51J
360611
6520179
360
20
42
10
504
43
Phase III
AP00387
51J
360516
6520323
360
<10
1
<10
6
11
Phase III
AP00388
51J
360652
6519992
360
100
57
10
1160
215
Phase III
AP00389
51J
360668
6520006
360
115
58
35
1160
248
Phase III
AP00390
51J
361637
6519768
360
<10
219
90
1710
11
Phase III
AP00391
51J
361632
6519679
360
<10
108
30
1830
11
Phase III
AP00392
51J
361615
6519689
360
<10
48
85
881
11
Phase III
AP00393
51J
361619
6519679
360
<10
89
35
1570
11
Phase III
AP00394
51J
361614
6519683
360
10
118
75
1640
22
Phase III
AP00395
51J
361045
6520018
360
130
114
140
1580
280
Phase III
AP00396
51J
361027
6519994
360
80
104
125
962
172
Phase III
AP00397
51J
361040
6519951
360
170
129
60
971
366
Phase III
AP00398
51J
361094
6519734
360
70
156
45
1580
151
Phase III
AP00399
51J
361141
6519754
360
160
150
200
1450
344
Phase III
AP00400
51J
360868
6519801
360
700
164
15
1600
1507
Phase III
AP00401
51J
360711
6520035
360
160
39
20
1060
344
Phase III
AP00402
51J
360787
6520161
360
150
60
15
792
323
Phase III
AP00403
51J
361145
6519645
360
210
253
135
2060
452
Phase III
AP00404
51J
361257
6519594
360
230
76
65
875
495
Phase III
AP00405
51J
360814
6519412
360
845
149
35
1440
1819
Phase III
AP00406
51J
360854
6519426
360
7110
59
15
679
15308
Phase III
AP00407
51J
360827
6519349
360
7820
125
25
518
16836
Phase III
AP00408
51J
360874
6519359
360
90
13
55
16
194
Phase III
AP00409
51J
360815
6519430
360
7560
113
50
1220
16277
Phase III
AP00410
51J
360922
6519191
360
25
26
25
707
54
Phase III
AP00411
51J
361019
6519212
360
80
14
35
173
172
Phase III
AP00412
51J
361019
6519282
360
580
35
35
233
1249
Phase III
AP00413
51J
360990
6519314
360
110
70
35
1340
237
Phase III
AP00414
51J
361034
6519367
360
10500
50
40
409
22607
Phase III
AP00415
51J
361627
6519653
360
20
12
<10
30
43
Phase III
AP00416
51J
361606
6519658
360
20
133
20
1430
43
Phase III
AP00417
51J
361602
6519631
360
15
161
70
924
32
Phase III
AP00418
51J
361467
6519760
360
15
5
<10
3
32
Phase III
AP00420
51J
360814
6520560
360
140
169
25
1270
301
Phase III
AP00421
51J
360826
6520551
357
165
212
45
1450
355
Phase III
AP00422
51J
360822
6520577
361
110
159
170
1200
237
Phase III
AP00423
51J
360817
6520614
361
150
211
40
2050
323
Phase III
AP00424
51J
360840
6520616
357
75
103
35
651
161
Phase III
AP00425
51J
360868
6520409
361
695
128
25
1830
1496
Phase III
AP00426
51J
360872
6520395
362
3050
243
25
836
6567
Phase III
AP00427
51J
360919
6520351
358
45
97
155
607
97
Phase III
AP00428
51J
360901
6520340
360
200
94
85
725
431
Phase III
AP00429
51J
360889
6520317
362
95
139
15
724
205
Phase III
Sample_ID
Zone
East
North
RL
Li_ppm
Cs_ppm
Ta_ppm
Rb_ppm
Li2O_ppm
Comments
AP00430
51J
360900
6520281
359
995
213
20
895
2142
Phase III
AP00431
51J
360474
6520141
358
130
107
25
823
280
Phase III
AP00432
51J
360442
6520154
358
45
5
<10
52
97
Phase III
AP00433
51J
361463
6520009
340
125
291
130
803
269
Phase III
AP00434
51J
361429
6520029
340
40
133
70
943
86
Phase III
AP00435
51J
361955
6520256
322
15
10
<10
51
32
Phase III
AP00436
51J
360831
6519423
366
3590
136
80
368
7729
Phase III
AP00437
51J
361180
6519529
369
40
8
<10
10
86
Phase III
AP00438
51J
361182
6519517
368
50
132
55
1470
108
Phase III
AP00439
51J
361158
6519520
370
15
2
<10
9
32
Phase III
Highly anomalous result requiring follow-up
Competent Person Statement
The information in this announcement relating to Exploration Results, Mineral Resources or Ore Reserves is based on
information compiled by Luke Marshall, who is a consultant to Apollo Phoenix Resources and Estrella Resources, and a
member of The Australasian Institute of Geoscientists. Mr Marshall has sufficient experience relevant to the style of
mineralisation and type of deposit under consideration, and to the activity he is undertaking to qualify as a Competent Person
as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resource and Ore
Reserves”. Mr Marshall consents to the inclusion in the report of the matters based on his information in the form and context
in which it appears.
FURTHER INFORMATION CONTACT
Christopher J. Daws
Chief Executive Officer
Estrella Resources Limited
info@estrella.com.au
APPENDIX 3 JORC TABLE 1 - JORC CODE, 2012 EDITION – TABLE 1 MELP
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Sampling
Nature and quality of sampling (e.g. cut
techniques
channels, random chips, or specific specialised
industry standard measurement tools
appropriate to the minerals under investigation,
Commentary
The samples reported in this document are rock chip grab samples collected at surface
from outcropping pegmatite occurrences.
This involved taking a random grab sample of approximately 3kg using a geological
hammer and numbered calico bag.
such as down hole gamma sondes, or handheld
XRF instruments, etc.). These examples should
not be taken as limiting the broad meaning of
sampling.
These rock chip samples should not be considered to be representative samples of the
pegmatite occurrences.
Drill testing is required to collect representative sample data through the pegmatites.
Samples were analysed by an industry standard crush and grind prep, a 4 acid digest and
ICP-MS or ICP-OES finish depending on the element being analysed.
Include reference to measures taken to ensure
sample representivity and the appropriate
No measures have been taken to ensure sample representivity at this stage as the project
is in the very early stages of assessment.
calibration of any measurement tools or systems
used.
Aspects of the determination of mineralisation
that are material to the Public Report.
In cases where ‘industry standard’ work has
been done this would be relatively simple (e.g.
‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to
No determinations were made in this regard. Pegmatite occurrences were sampled and
assayed regardless of determination with regard to mineralisation.
Rock chip samples were collected using a geological hammer and a calico bag to achieve
a random grab sample.
These samples are not considered to be representative of the pegmatites.
Criteria
JORC Code explanation
produce a 30 g charge for fire assay’). In other
Commentary
cases more explanation may be required, such
as where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (e.g. submarine nodules)
may warrant disclosure of detailed information
Drilling
techniques
Drill type (e.g. core, reverse circulation, open-
Not applicable, no drill results are being reported.
hole hammer, rotary air blast, auger, Bangka,
sonic, etc.) and details (e.g. core diameter, triple
or standard tube, depth of diamond tails, facesampling bit or other type, whether core is
oriented and if so, by what method, etc.).
Drill sample
recovery
Method of recording and assessing core and
Not applicable, no drill results are being reported.
chip sample recoveries and results assessed.
Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias
may have occurred due to preferential loss/gain
of fine/coarse material.
Logging
Whether core and chip samples have been
geologically and geotechnically logged to a level
A log was collected for each sample which included sample location, sample type, date
Criteria
JORC Code explanation
of detail to support appropriate Mineral Resource
Commentary
sampled and sample condition.
estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc.)
photography.
The total length and percentage of the relevant
intersections logged.
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary
split, etc. and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
Not applicable, no drill results are being reported.
Not applicable, no drill results are being reported.
Sample condition field to record moisture and sample recovery is included in the sampling
log sheet and populates the assay table of the database.
Sample preparation is considered to be appropriate for rock chip sampling as per industry
standard practices.
technique.
Quality control procedures adopted for all sub-
No quality control procedures have been undertaken other than the laboratory’s own
internal QAQC check and procedures.
sampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
No measures have been taken in this regard as these are preliminary rock chip samples.
Sample sizes may not be appropriate to the grain size of the material being sampled.
Grain sizes of the pegmatites varied from 4mm to 25mm.
Criteria
JORC Code explanation
Whether sample sizes are appropriate to the
Commentary
grain size of the material being sampled.
Quality of
assay data
and
laboratory
tests
For geophysical tools, spectrometers, handheld XRF instruments,
etc., the parameters used in determining the analysis including
instrument make and model, reading times, calibrations factors
applied and their derivation, etc.
No QAQC procedures have been put in place for the MELP given the
very early stage of assessment.
No geophysical methods or hand-held XRF units have been used for
determination of grades in this announcement.
Nature of quality control procedures adopted (e.g. standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (i.e. lack of bias) and precision have been established.
Verification
of sampling
and
assaying
The verification of significant intersections by either independent or
Not applicable, no intersections are being reported.
alternative company personnel.
The use of twinned holes.
Not applicable, no drill results are being reported.
Documentation of primary data, data entry procedures, data
Drill hole data were sourced from digital sources and original hard-
verification, data storage (physical and electronic) protocols.
copy sampling and assay records, and imported into a central
electronic database. Datashed software is used to validate and
manage the data.
Location of
data points
Discuss any adjustment to assay data.
Li2O was calculated as Li x 2.153.
Accuracy and quality of surveys used to locate drill holes (collar and
Rock chip sample locations were recorded by handheld GPS.
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
Data spacing
and
distribution
Specification of the grid system used.
Original surveying was undertaken in MGA94 zone 51.
Quality and adequacy of topographic control.
Topographic control is considered more than adequate for the results
being reported.
Data spacing for reporting of Exploration Results.
These are random rock chip sampled with no regular data spacing.
Whether the data spacing and distribution is sufficient to establish the
Not applicable, no mineral resource or ore reserve is being reported.
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and
classifications applied.
Orientation
of data in
relation to
geological
structure
Whether sample compositing has been applied
Not applicable for random rock chips.
Whether the orientation of sampling achieves unbiased sampling of
Not applicable, these are spot samples.
possible structures and the extent to which this is known, considering
Not applicable, no drilling is being reported.
the deposit type.
If the relationship between the drilling orientation and the orientation
of key mineralised structures is considered to have introduced a
sampling bias, this should be assessed and reported if material.
Sample
security
The measures taken to ensure sample security.
Samples were submitted to the SGS Kalgoorlie laboratory by Apollo
Phoenix Resources. Sample security was ensured up to this point as
the samples were always in the presence of Apollo staff.
Audits or
reviews
The results of any audits or reviews of sampling techniques and data.
No audits or reviews have been undertaken on the samples being
reported due to the small number of samples in the dataset.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Mineral
Type, reference name/number, location and ownership including
tenement and
agreements or material issues with third parties such as joint
land tenure
status
ventures, partnerships, overriding royalties, native title interests,
Commentary
Apollo Phoenix Resources (25%) and Estrella Resources (75%) hold
a combined 100% interest the lithium rights to the project.
There are no known impediments to operate in the area.
historical sites, wilderness or national park and environmental
settings.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
Exploration
done by other
parties
Acknowledgment and appraisal of exploration by other parties.
Exploration has been undertaken by previous holders, but
predominantly Western Mining Corporation (WMC) during the 1980s
and Titan Resources from 2001. Consolidated Minerals took over
Titan in 2006. No mining for Li has been undertaken on the project.
Geology
Deposit type, geological setting and style of mineralisation.
The geology at MELP consists of a mafic-ultramafic belt bound to the
east by metasediments and to the west by granites.
The mineralisation at MELP consists of pegmatite swarms in
greenstone belts at some distance from their parent granites.
The lithium baring minerals identified to date are spodumene and
accessory lepidolite.
Depth of complete oxidation varies from 10 to 80 metres below the
natural surface but is typically around 40 metres.
Criteria
Drill hole
Information
JORC Code explanation
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information
Commentary
No drill results are reported in this announcement.
No information is excluded.
for all Material drill holes:
o
easting and northing of the drill hole collar
o
elevation or RL (Reduced Level – elevation above sea
level in metres) of the drill hole collar
o
dip and azimuth of the hole
o
down hole length and interception depth
o
hole length.
If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should clearly
explain why this is the case.
Data
aggregation
methods
In reporting Exploration Results, weighting averaging techniques,
Not applicable for rock chip sampling.
maximum and/or minimum grade truncations (e.g. cutting of high
grades) and cut-off grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low grade results, the procedure used
for such aggregation should be stated and some typical examples of
such aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent values
No metal equivalents are used.
Criteria
JORC Code explanation
should be clearly stated.
Commentary
Relationship
between
mineralisation
widths and
intercept
lengths
These relationships are particularly important in the reporting of
Not applicable for random rock chip grab samples.
Exploration Results.
If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (e.g. ‘down hole length, true
width not known’).
Diagrams
Appropriate maps and sections (with scales) and tabulations of
Appropriate maps and tables are included in the body of the Report.
intercepts should be included for any significant discovery being
reported. These should include, but not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
Balanced
reporting
Where comprehensive reporting of all Exploration Results is not
This is not a large enough dataset to ensure balanced reporting.
practicable, representative reporting of both low and high grades
and/or widths should be practiced to avoid misleading reporting of
Exploration Results.
Other
substantive
exploration
data
Other exploration data, if meaningful and material, should be
reported including (but not limited to): geological observations;
geophysical survey results; geochemical survey results; bulk
samples – size and method of treatment; metallurgical test results;
bulk density, groundwater, geotechnical and rock characteristics;
potential deleterious or contaminating substances.
Pegmatite occurrences were identified from historic detailed
geological mapping and then confirmed by ground checking.
Geological observations are included in the report. All core drilled at
MELP is available for review and is stored at the Fisher mine offices
in Kambalda.
Criteria
JORC Code explanation
Commentary
Metallurgical test work is out of the scope of this report.
Multi-element assay suites have been analysed for all samples.
Further work
The nature and scale of planned further work (e.g. tests for lateral
extensions or depth extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling areas,
provided this information is not commercially sensitive.
Further field confirmation and rock chip sampling is planned,
followed by drill testing of the most anomalous pegmatites.
The presence of possible extensions cannot be determined at this
stage.
Share your feedback
Discover