Assays confirm Ni Sulphide Discovery
Released
Released
Announcement PDF
8 July 2019
ASX ANNOUNCEMENT
ASSAY RESULTS CONFIRM NEW SULPHIDE NICKEL DISCOVERY ZONE AT
CARR BOYD ROCKS
HIGHLIGHTS
Assay results returned from RC drilling at T5 EM Anomaly, Carr Boyd Rocks
o
8m @ 1.11% Ni & 0.36% Cu returned from drill hole CBP042
o
Includes 4m @ 1.60% Ni & 0.31% Cu from matrix sulphide zone
1m @ 0.61% Ni & 0.57% Cu returned from drill hole CBP043
Mineralisation extends over 400m strike and open north, south and developing at depth
Most significant results to date outside of the known Carr Boyd Nickel Mine area
Intersected sulphides are located on a stratigraphic primary basal contact position
DHTEM modelling confirms recent drilling has intersected the T5 MLEM conductor
Results confirm potential for the Carr Boyd system to host multiple fertile positions
Estrella Resources Limited (ASX: ESR) (Estrella or the Company) is pleased to report the laboratory assay results
which have been returned from the recent drilling success at the T5 EM target within the Carr Boyd Nickel Project
(Table 1 and Figure 1). The T5 Target is located approximately 1,000-1,200m North North West of the Carr Boyd
Nickel Mine and is interpreted to be a significant new zone of nickel-copper sulphides discovered away from the
known historic mineralisation. Modelling of the geological and geophysical data is supportive of mineralisation
extending to the north, south, and at depth.
Table 1: Significant Intersection Results above 0.4% Ni cut-off grade.
Hole ID
CBP042
Incl l
CBP043
From
129m
133m
126m
To
137m
137m
127m
Width
8m
4m
1m
Ni%
1.11%
1.60%
0.61%
Cu%
0.36%
0.31%
0.57%
Co ppm
507ppm
689ppm
346ppm
Nickel-Copper Sulphide Drilling Success
As previously announced1, Estrella completed two RC drill holes in late May (Figures 2 & 3 and Table 2 below)
testing the T5 EM target which was previously identified by the Company in its earlier ground Moving Loop ElectroMagnetic (MLEM) program 2 (Figure 4). Historic drilling2 ~400m further to the south, intersected disseminated and
matrix sulphides on the interpreted basal contact of the western ultramafic unit, returning 3.35m at 0.79% Ni &
0.35% Cu which included a higher-grade zone of 0.61m grading 2.12% Ni & 0.56% Cu from 100.89m in drill hole
GD124. The MLEM survey identified the T5 Target zone to the north of this historic drilling within an area untested
by deeper drilling.
Assay results have been returned from SGS Laboratories in Perth (Tables 1 and 4) confirming the presence and
grade of the Ni-Cu sulphides intersected in the drilling as previously announced1. Both holes intersected the same
basal contact as the historic drilling to the south, however the grades and width of the mineralisation in the Estrella
holes are better than the historic drilling which are the most significant results returned to date from outside of the
known Carr Boyd Mine area.
Matrix Sulphide Zone
Footwall Basalt
Sulphide Zone
Host Ultramafic
Figure 1. Sulphide mineralised samples within CBP042 at Carr Boyd. Black samples are the higher grade, sulphide rich matrix zone.
The host ultramafic sits against a primary basal contact (not sheared) and is underlain by a sequence of mafic
basalts and felsic sediments to the west. The base of the ultramafic sequence comprises low-magnesium
ultramafics which have a weakly to highly disseminated sulphide zone developing from the base upwards. This is
overlain by a geochemically different, second pulse of ultramafic comprising the higher-grade matrix sulphides at
the base of a thicker, magnesium-rich (20-25% MgO) host ultramafic which develops eastwards.
The DHTEM clearly defines that the recent drilling intersected the T5 MLTEM conductor. Modelling of the
geochemical and geophysical data potentially indicates a strong target zone to the north as well as below the current
and historic drilling. The modelling of the data is supportive of mineralisation opening up along the length of the
basal contact to the north, as well as at depth below the drilling to the north & south. Deep diamond core drilling is
currently being planned targeting a zone 300m to the north and south of the current drilling and directly below T5
at a vertical target depth of 300-400m below surface. This planned drilling will be testing the basal contact over a
greater strike length of ~700-800m providing critical geological and geochemical vectoring data. The drilling will
also provide a platform for deep DHTEM geophysical testing for strengthening Ni-Cu sulphide mineralisation.
Company Chief Executive Officer, Chris Daws said “Having such strong nickel assay results with the initial two
holes drilled into this target area is very exciting and I look forward to continuing the exploration in earnest as we
try to unlock a world-class discovery”.
Table 2: Drill Hole Collar Details
Hole ID
CBP042
CBP043
Hole Type
RC
RC
Depth
234m
180m
Drill Hole Collar Details
Dip
Azimuth
-60
090
-60
095
East_MGA
367069
367073
1: ASX Announcement (ASX:ESR) - 28/05/2019 Nickel Discovery Carr Boyd Rocks
2: ASX Announcement (ASX:ESR) - 26/11/2018 EM Confirms Two High Priority Targets at Carr Boyd
North_MGA
6673940
6673896
Figure 2: Plan showing drill hole locations and interpreted geology from the logging.
Figure 3: Cross-section with intersection results and interpreted geology in drill hole CBP042.
Figure 4: Location of T5 EM Target relative to the Carr Boyd Nickel Mine.
ABOUT THE PROJECT AND THE CBLC
The CBLC is a 75km 2 layered mafic igneous complex, which hosts several occurrences of nickel and copper
sulphides. The most significant occurrence discovered to date is at the Carr Boyd Rocks mine, where massive
sulphide nickel and copper mineralisation is hosted by bronzitite breccias (pyroxenites) emplaced within the
gabbroic sequence of the Complex. The CBLC is in a Tier 1 jurisdiction approximately 80km north north-east of
Kalgoorlie Western Australia and 35km north of the Black Swan nickel treatment facility. An all-weather haul road
accessible by Apollo under a granted miscellaneous license connects the Project to the Goldfields Highway via
Scotia.
A “Voisey Bay” style model has not been adequately explored within the CBLC. This represents a compelling
exploration target opportunity which the Company will continue to aggressively pursue.
Figure 5. Location of Carr Boyd relation to commercial centres and other major Ni projects.
Table 3: Schedule of Tenements
Schedule of Mining and Exploration Tenements
Country State/Region Project Tenement ID Area Ha Grant Date Mineral Rights Interest %
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
Australia
WA
WA
WA
WA
WA
WA
WA
WA
WA
CBNP
CBNP
CBNP
CBNP
CBNP
CBNP
CBNP
CBNP
CBNP
E 31/1124
E 29/1012
E 29/982
E 31/726
E31/1162
M 31/12
M 31/159
M 31/109
L24/186
6229
1780
890
5419
9,196
266
79
98
279
1/05/2017
20/09/2017
2/01/2017
3/04/2008
26/03/2018
20/11/1984
21/01/1997
25/07/1991
13/04/2007
All
All
All
All
All
All
All
All
N/A
100
100
100
100
100
100
100
100
100
Table 4: List of 1m Cone Split Assays
HoleID
From
To
SampleID
Co_ppm
Cr_ppm
Cu_ppm
Fe_ppm
Mg_ppm
Ni_ppm
S_ppm
CBP042
120
121
ECB301
56
380
105
81600
38800
131
910
CBP042
121
122
ECB302
55
320
78
79600
44600
125
450
CBP042
122
123
ECB303
52
280
106
98100
55400
114
1190
CBP042
123
124
ECB304
54
280
111
98600
55600
113
1190
CBP042
124
125
ECB305
59
280
238
95400
51900
252
2410
CBP042
125
126
ECB306
59
285
227
92900
51500
280
2490
CBP042
126
127
ECB307
174
415
1500
126000
57900
2770
19400
CBP042
127
128
ECB308
213
520
2730
144000
74200
3600
26300
CBP042
128
129
ECB309
208
570
3220
145000
76100
3720
30700
CBP042
129
130
ECB310
271
495
2620
155000
74100
5070
32700
CBP042
130
131
ECB311
248
510
2530
148000
76200
4660
28400
CBP042
131
132
ECB312
314
525
7210
164000
70500
5980
34000
CBP042
132
133
ECB313
468
595
3930
200000
64700
9490
71100
CBP042
133
134
ECB314
678
605
2600
259000
63800
15800
81800
CBP042
134
135
ECB315
670
660
2700
267000
66800
16300
77700
CBP042
135
136
ECB316
749
675
2240
283000
68000
16800
78500
CBP042
136
137
ECB317
659
700
4950
252000
63800
14900
80700
CBP042
137
138
ECB318
164
1010
1900
120000
116000
2730
15000
CBP042
138
139
ECB319
118
1080
1760
102000
113000
2000
8840
CBP042
139
140
ECB320
93
1110
738
95800
115000
1460
5430
CBP043
120
121
ECB121
65
260
728
105000
50600
710
7220
CBP043
121
122
ECB122
69
260
687
93600
51000
646
6700
CBP043
122
123
ECB123
48
265
161
84600
51600
220
1700
CBP043
123
124
ECB124
50
265
242
83400
45900
194
2010
CBP043
124
125
ECB125
60
265
314
92700
51800
431
3780
CBP043
125
126
ECB126
66
310
310
88300
50700
507
4870
CBP043
126
127
ECB127
346
720
5730
180000
89700
6050
43400
CBP043
127
128
ECB128
105
635
708
91200
80600
1680
11800
CBP043
128
129
ECB129
104
740
386
94200
114000
1330
6520
CBP043
129
130
ECB130
110
770
268
101000
131000
1580
5530
CBP043
130
131
ECB131
96
695
277
103000
133000
1280
4590
CBP043
131
132
ECB132
52
305
256
64000
65800
606
4060
Competent Person Statement
The information in this announcement relating to Exploration Results, Mineral Resources or Ore Reserves is based
on information compiled by Neil Hutchison of Geolithic Geological Services, who is a consultant to Estrella
Resources, and a member of The Australasian Institute of Geoscientists. Mr Hutchison has sufficient experience
relevant to the style of mineralisation and type of deposit under consideration, and to the activity he is undertaking
to qualify as a Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of
Exploration Results, Mineral Resource and Ore Reserves”. Mr Hutchison consents to the inclusion in the report of
the matters based on his information in the form and context in which it appears.
Forward-Looking Statements
This document may include forward-looking statements. Forward-looking statements include, but are not limited to,
statements concerning the Company’s planned exploration program and other statements that are not historical
facts. When used in this document, the words such as "could," "plan," "expect," "intend," "may”, "potential,"
"should,", “further” and similar expressions are forward-looking statements. Although the Company believes that its
expectations reflected in these forward- looking statements are reasonable, such statements involve risks and
uncertainties and no assurance can be given that further exploration will result in Mineral Resources.
FURTHER INFORMATION CONTACT
Christopher J. Daws
Chief Executive Officer
Estrella Resources Limited
info@estrellaresources.com.au
APPENDIX 3 JORC TABLE 1 - JORC CODE, 2012 EDITION – TABLE 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
Nature and quality of sampling (e.g. cut RC samples have been split on the rig by a cone splitter
techniques
channels, random chips, or specific
attached to a cyclone.
specialised
industry
standard 4m composite sample are collected from the sample
measurement tools appropriate to the
spoils using a scoop for all intervals, the 1m cone spilt
minerals under investigation, such as
samples are collected in their original calico sample bag
down hole gamma sondes or handheld
along the length of favourable targeted horizons.
XRF
instruments,
etc.).
These A handheld XRF tool was used to verify the mineralisation
examples should not be taken as
with samples reporting >0.4% Ni in disseminated zones
limiting the broad meaning of sampling.
and >1% Ni in the matrix sulphide zones.
XRF results have not been reported and are used as a
logging/sampling verification tool only.
No other measurement tools other than directional survey
tools have been used in the holes.
Include reference to measures taken to
ensure sample representivity and the
appropriate
calibration
of
any
measurement tools or systems used.
Aspects of the determination of
mineralisation that are material to the
Public Report.
Drilling
techniques
Drill sample
recovery
In cases where ‘industry standard’ work
has been done this would be relatively
simple (e.g. ‘reverse circulation drilling
was used to obtain 1 m samples from
which 3 kg was pulverised to produce a
30g charge for fire assay’). In other
cases more explanation may be
required, such as where there is coarse
gold that has inherent sampling
problems. Unusual commodities or
mineralisation types (e.g. submarine
nodules) may warrant disclosure of
detailed information
Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details
(e.g. core diameter, triple or standard
tube, depth of diamond tails, facesampling bit or other type, whether core
is oriented and if so, by what method,
etc).
Method of recording and assessing
core and chip sample recoveries and
results assessed.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Whether a relationship exists between
sample recovery and grade and
whether sample bias may have
occurred due to preferential loss/gain of
fine/coarse material.
Cone splitting is considered an industry best practice
method for ensuring sample representivity.
Determination of mineralisation has been based on
geological logging and confirmation using a pXRF
machine. Samples were dispatched for laboratory
analysis.
Determination of mineralisation is based on reported four
acid digest laboratory assay results, with samples above
4000ppm Ni and or 500ppm Cu considered mineralised.
Reverse circulation drilling was used to obtain 1m
samples from which a nominal 2-3 kg (depending on
sample recovery) was pulverised.
4m composite sample were collected through zones
determine to be non-mineralised for data set
completeness.
Samples have been dispatched to a commercial
laboratory in Perth for analysis
Samples were analysed using a 4 acid digest with ICPOES and ICP-MS finish for 13 base metal elements.
Drilling was undertaken by a 5 ½ inch face sampling RC
hammer with a 5 ¾ inch button bit on 5-inch rods.
All sample were dry and sample recovery was reordered
in the field by the geologist based on sample spoil size.
Sample recovery in both holes was high with negligible
loss of recovery observed.
No relationship has been established between sample
recovery and reported grade as the project is in its
preliminary stages.
Different sampling and drilling
techniques will be used in future to establish a baseline
for this purpose.
Criteria
Logging
Subsampling
techniques
and sample
preparation
Quality of
assay data
and
laboratory
tests
Verification
of sampling
and
assaying
JORC Code explanation
Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate
Mineral
Resource
estimation,
mining
studies
and
metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
The total length and percentage of the
relevant intersections logged.
If core, whether cut or sawn and
whether quarter, half or all core taken.
If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
Quality control procedures adopted for
all sub-sampling stages to maximise
representivity of samples.
Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for
instance
results
for
field
duplicate/second-half sampling.
Whether sample sizes are appropriate
to the grain size of the material being
sampled.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (i.e. lack of bias) and
precision have been established.
Commentary
Detailed industry standard of sieving each interval and
collecting drill chips in chip trays was undertaken and drill
hole logs are recorded in Micromine Software as the
drilling progressed.
The entire length of both holes was logged.
The
verification
of
significant
intersections by either independent or
alternative company personnel.
The laboratory results returned results consistent with the
pXRF results recorded in the field.
Umpire checks will be completed on the higher-grade
samples in due course.
No twin holes have been drilled.
The data was collected and logged using Micromine
Software. The data will be loaded into an externally
hosted and managed database and loaded by an
independent consultant, before being validated and
checked, then exported and send back to ESR for
analysis.
No adjustments have been made to the assay data.
The holes were pegged by Geolithic Geological Services
using a hand held GPS + 3m
The rig was setup over the nominated hole position and
final GPS pickup occurred at the completion of the hole.
The use of twinned holes.
Documentation of primary data, data
entry procedures, data verification, data
storage (physical and electronic)
protocols.
Location of
data points
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
other locations used in Mineral
Resource estimation.
Samples are rotary cone split to achieve a nominal 2-3kg
split sample for laboratory submission
The sample preparation technique is considered industry
best standard practice
Blank Standard reference material was inserted into the
sample stream to determine laboratory cleanliness.
No field duplicates have been collected in this program.
Field duplicates will be collected during the next phase of
sampling with mineralised zones of varying grade
selected for duplicate samples.
4m composites and 1m splits where collected through the
mineralised zone to compare results.
Sample sizes are appropriate to the grain size of the
mineralisation.
No results from geophysical tools are being reported.
No handheld XRF results are reported however the tool
was used to verify the mineralisation with reporting >0.4%
Ni in disseminated zones and >1% Ni in the matrix
sulphide zones.
Inserted blank standards came back within expected
range from the laboratory assays.
Criteria
Data
spacing
and
distribution
Orientation
of data in
relation to
geological
structure
Sample
security
Audits or
reviews
JORC Code explanation
Specification of the grid system used.
Quality and adequacy of topographic
control.
Data spacing for reporting of
Exploration Results.
Whether the data spacing and
distribution is sufficient to establish the
degree of geological and grade
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s)
and
classifications
applied.
Whether sample compositing has been
applied
Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this
is known, considering the deposit type.
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
The measures taken to ensure sample
security.
The results of any audits or reviews of
sampling techniques and data.
Commentary
MGA94_51
More than adequate given the early stage of the project
Drilling was completed on 40m sections
Not applicable, no Mineral Resource is being stated.
No compositing has been applied. Intercepts are quoted
as length weighted intervals.
The drill line and drill hole orientation are oriented as
close as possible to normal the interpreted MLEM target.
At this stage, we cannot determine the relationship
between drilling direction and direction of mineralised
structures.
Samples are in the possession of ESR personnel from
field collection to laboratory submission.
No audits or reviews have been conducted for this release
given the very small size of the dataset.
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral
Type, reference name/number,
Apollo Phoenix Pty Ltd holds a 100% interest in the nickel
tenement and
location and ownership including
and base metal rights to the project which it has agreed
land tenure
agreements or material issues with
to sell to ESR pursuant to a conditional agreement as
status
third parties such as joint ventures,
announced on 16 October 2017.
partnerships, overriding royalties,
There are no known impediments to operate in the area.
native title interests, historical sites,
Refer to Table 3 of this announcement for the tenement
wilderness or national park and
schedule.
environmental settings.
The security of the tenure held at the
time of reporting along with any
known impediments to obtaining a
licence to operate in the area.
Exploration
Acknowledgment and appraisal of
The Carr Boyd Rocks deposit was discovered by Great
done by other
exploration by other parties.
Boulder Mines, in a joint venture with North Kalgurli Ltd
parties
in 1968. The deposit was mined between 1972 and
1975, during which time they explored for additional
breccia pipe occurrences near the mine.
WMC acquired Great Boulder Mines Ltd in 1975, briefly
reopening the mine in 1977 before closing it permanently
shortly thereafter due to a collapse in the nickel price.
The mine had produced 210,000t at 1.44% Ni and 0.46%
Cu before its closure.
From 1968 Pacminex Pty Ltd held most of the ground
over the CBLC outside of the immediate mine area.
Between 1968 and 1971 they conducted extensive
Criteria
JORC Code explanation
Geology
Deposit type, geological setting and
style of mineralisation.
Commentary
exploration programs searching for large basal contact
and/or stratabound Ni-Cu deposits. It was during this
time that most of the disseminated and cloud sulphide
occurrences such as those at Tregurtha, West Tregurtha
and Gossan Hill were discovered.
Defiance Mining acquired the regional tenements from
Pacminex in 1987 and focused on exploration for PGE
deposits between 1987 and 1990. In 1990 Defiance
purchased the Carr Boyd Rocks mine from WMC and
switched focus to the mine area between 1990 and 2001,
leaving many PGE targets untested.
From 1990 Defiance dewatered the mine to conduct
testwork and feasibility studies on the remnant
mineralisation. Metallurgical testwork, Mineral Resource
estimations, and scoping studies were completed.
Around 1996 the focus shifted again to regional
exploration for large tonnage basal contact deposits.
In 2001 Titan Resources Ltd (Titan) acquired the project
and recommenced economic evaluations of the remnant
material at Carr Boyd Rocks before embarking on
another regional exploration program focusing on the
basal contact. An aeromagnetic survey, airborne EM
reprocessing, and several programs of RAB and RC
drilling were completed.
From 2005 Yilgarn Mining entered a JV with Titan and
continued with some regional exploration, but focused
most attention in and around the Carr Boyd Rocks mine.
In 2007 Titan was acquired by Consolidated Minerals Ltd
(Consmin). Consmin conducted IP surveys and detailed
gravity surveys, but did not drill any targets before selling
the project to Salt Lake Mining (SLM) in 2013. SLM
completed limited drilling to meet expenditure
commitments, before selling the project to Apollo
Phoenix Resources in 2016.
The Carr Boyd project lies within the Achaean Yilgarn
Craton in a 700km belt of elongate deformed and folded
mafic, ultramafic rocks and volcanic sediments intruded
by granitoids which is referred to as the NorsemanWiluna Belt. The belt has been divided into several
geological distinct terranes, with the project area lying at
the northern end of the Gindalbie terrane (Swager, 1996).
The geology of the Carr Boyd area is dominated by the
Carr Boyd layered mafic-ultramafic intrusive complex
(CBLC). This layered intrusive covers an area of 17 km
by 7km and has intruded into an Achaean
Greenstone/Granite succession. The CBLC is comprised
of a basal sequence of dunites, which are overlain by
peridotites / pyroxenites and above that by gabbros. The
intrusion has been interpreted to have been tilted to the
east with the geometry of the intrusive further
complicated by regional deformation and folding. The
sequence has been metamorphosed to upper
greenschist to lower amphibolite facies.
Several distinctive styles of Ni and Ni-Cu mineralisation
have been identified within the CBLC. At the Carr Boyd
Rocks Nickel Mine Ni-Cu mineralisation is hosted within
several 20 - 60m diameter brecciated pipe-like bodies
that appear to be discordant to the magmatic
stratigraphy. Mineralisation is hosted by a matrix of
sulphides
(pyrrhotite,
pentlandite,
pyrite
and
Criteria
JORC Code explanation
Drill hole
Information
A summary of all information
material to the understanding of the
exploration results including a
tabulation
of
the
following
information for all Material drill
holes:
o
easting and northing of the
drill hole collar
o
elevation or RL (Reduced
Level – elevation above sea
level in metres) of the drill
hole collar
o
dip and azimuth of the hole
o
down hole length and
interception depth
o
hole length.
If the exclusion of this information is
justified on the basis that the
information is not Material and this
exclusion does not detract from the
understanding of the report, the
Competent Person should clearly
explain why this is the case.
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (e.g. cutting of high
grades) and cut-off grades are
usually Material and should be
stated.
Where
aggregate
intercepts
incorporate short lengths of high
grade results and longer lengths of
low grade results, the procedure
used for such aggregation should be
stated and some typical examples of
such aggregations should be shown
in detail.
The assumptions used for any
reporting of metal equivalent values
should be clearly stated.
These relationships are particularly
important in the reporting of
Exploration Results.
If the geometry of the mineralisation
with respect to the drill hole angle is
known, its nature should be
Commentary
chalcopyrite) within brecciated Bronzite and altered
country rock clasts.
Stratiform Ni-Cu-PGE mineralisation has been identified
at several different stratigraphic levels within the layered
magmatic complex. Low grade stratiform disseminated
Ni-Cu-PGE sulphides have been identified at several
locations within the basal parts of the complex and at
shallower stratigraphic levels of the complex. The
presence of Ni-Cu-PGE mineralisation within multiple
stratigraphic positions and of several unique styles of
mineralisation highlights the potential of the CBLC for
hosting a substantial Ni-Cu deposit.
The Company is not aware of any significant cobalt
exploration being completed in the area.
All relevant drillhole information can be found in Table 2
of the announcement.
No information is excluded.
Intersections will be reported on a nominal 0.4% Ni or
0.1% Cu cut-off with length weighted intervals.
Aggregation is irrelevant as all samples are 1m in length
within the reported mineralised zone.
No metal equivalents are used in this announcement.
The drill line and drill hole orientation in relation to
mineralisation orientation is perpendicular to the MLEM
plate and the geological contact targeted.
True width cannot be determined at this stage as the dip of
the contact is yet to be accurately determined.
Criteria
Diagrams
Balanced
reporting
Other
substantive
exploration
data
Further work
JORC Code explanation
Commentary
reported.
If it is not known and only the down
hole lengths are reported, there
should be a clear statement to this
effect (e.g. ‘down hole length, true
width not known’).
Appropriate maps and sections Appropriate maps, sections and tables are included in the
(with scales) and tabulations of
body of the Report.
intercepts should be included for
any significant discovery being
reported. These should include, but
not be limited to a plan view of drill
hole collar locations and appropriate
sectional views.
Where comprehensive reporting of
All new drillholes within this announcement are reported in
all Exploration Results is not
Table 1 & Table 2 and includes both high and low grade
practicable, representative reporting
results.
of both low and high grades and/or Historic drilling results only include the many intersection
widths should be practiced to avoid
results and have been cross referenced to previous
misleading reporting of Exploration
announcements which includes the full assay results.
Results.
Other exploration data, if meaningful Everything meaningful and material is disclosed in the
and material, should be reported
body of the report.
including (but not limited to): Geological observations are included in the report.
geological
observations; No bulk samples, metallurgical, bulk density, groundwater,
geophysical
survey
results;
geotechnical and/or rock characteristics
Share your feedback
Discover