Drilling Resumes - Further Manganese Discovered Ira Miri
Released
Released
Announcement PDF
ASX: ESR
18 June 2025
Diamond Drilling Recommences, Further
Manganese Outcrops Discovered at Ira Miri
Project
HIGHLIGHTS
➔ Powerful track-mounted diamond drill mobilised to site and begun twinning hole EMDD001,
replacing the man-portable rig (Figure 1)
➔ Second supergene manganese outcrop (Figure 2 & 3) located 350m north northwest of the first Ira
Miri discovery drillhole believed to be a direct continuation of mineralisation currently being drilled
➔ Mineralisation formed within the Noni Formation has been mapped over a 4.5km strike length
➔ Environmental License Approval has been received for the first modern minerals exploration
campaign in Timor-Leste to drill a number of highly prospective targets across the underexplored tenure
➔ The drill program consists of an initial 3,000m diamond and 10,000m RC drilling. A secondary round
is expected to consist of a further 10,000m RC drilling to be conducted after geological review
➔ Initial discovery zone and the new extension drilled over the next 3 weeks
Figure 1: Diamond drilling operations underway collaring EMDD002 at the Ira Miri discovery as part of the first ever
modern minerals exploration campaign in Timor-Leste
_____________________________________________________________________________________________________________
Office Address London House, Level 8, 216 St Georges Terrace, PERTH WA 6000 Postal Address GPO Box 2517, PERTH WA 6831
Phone +61 8 9481 0389 Fax +61 8 9463 6103
Email info@estrellaresources.com.au
Estrella Resources Limited (ASX: ESR) (Estrella or the Company) is pleased to announce a more powerful
diamond drill rig has commenced operations at the Company’s Ira Miri Manganese Project in Lautém
Municipality, Timor-Leste and a large, in-situ secondary supergene manganese outcrop has been
discovered in a location expected to be drilled as part of the maiden campaign.
The diamond drill rig (Figure 1) mobilised to site by CoreSearch has begun twinning hole EMDD001 which
was initally drilled by a man-portable rig and ended in manganese oxides at 7.8m depth.1 The new rig is
capable of PQ pre-collars and has more torque required to lift manganese core recovery.
Figure 2: Outcropping manganese oxides located 350m to the north northwest of the initial discovery zone
Figure 3: Estrella Murak Rai Exploration Geophysicist Eustaquio Amaral mapping and sampling the new supergene
manganese outcrop at Ira Miri. Samples containing visual estimates of >90% manganese oxides have been taken for
analysis.
1 Refer to ASX announcement dated 3 June 2025
As part of the hand-cutting of drill lines ahead of track development, the team made the discovery of further
highly-prospective manganese outcrop located ~350m to the north northwest of EMDD001 (Figure 4).2
The exposed mineralisation closely resembles the initial Ira Miri outcrop, with visual estimates of >90%
manganese oxides throughout the newly located zone which has been derived from the underlying Noni
Formation muds and cherts. Samples of this rock have been taken for analysis back to Dili and also to
Australia. Estrella will release the results when received which should take roughly 8 weeks.
Cautionary Statement on Visual Estimates
Visual estimates of mineral abundance should never be considered a proxy or substitute for laboratory analyses where
concentrations or grades are the factor of principal economic interest. Visual estimates also potentially provide no
information regarding impurities or deleterious physical properties relevant to valuations.
Figure 4: Aerial photograph of the Ira Miri and Sica Manganese Prospects with planned RC holes in blue and planned
diamond holes in green. The location of the new discovery is shown in relation to the initial outcrop located and
tested in EMDD001.
Commenting on the intersection Estrella Managing Director Chris Daws said:
“This latest discovery of a large in-situ manganese outcrop at Ira Miri is another clear validation of the project’s
potential, further supporting our geological model and confirming the extensive nature of supergene
manganese mineralisation within the Noni Formation.”
“With the mobilisation of a more powerful diamond rig, we’re now better equipped to achieve improved core
recovery and deeper penetration into the manganese zone. The rig has already commenced twinning our
initial hole and will provide critical data to guide our next phase of drilling. This will ensure our exploration
campaign is both technically robust and efficient.”
“As we move into the larger-scale drilling program—comprising 10,000m of RC and 3,000m of diamond
drilling—we remain focused on unlocking the full value of Ira Miri. Estrella is committed to building a strong
resource base in Timor-Leste and we look forward to sharing assay results and further updates as exploration
progresses. Go Estrella!”
The final Environmental License sign-off was handed to Estrella by the Minister and the ANM paving the
way for drilling to target both the Ira Miri and Sica manganese trends using a combination of RC and
diamond drilling. Estrella is currently utilising a diamond drill to gather as much information about the
2 Refer to ASX announcement dated 3 June 2025.
geology as necessary ahead of infill drilling with an RC rig package assembled in Timor-Leste by the drilling
partner, CoreSearch. The groundwork to prepare tracks and pads for the RC rig will commence within three
weeks ahead of RC drilling in around 7 weeks’ time.
Figure 5: Regional view of the intended drill program covering the Ira Miri, Sica and Lalena Prospects. The budget for the
Lalena drilling (4 holes) may be repurposed to extend initial drilling at the Ira Miri Prospect as success there grows.
Next Steps
Estrella’s proposed drilling campaign to be conducted by CoreSearch will consist of 10,000m of RC drilling
and 3,000m of diamond drilling. A secondary round of drilling is also under contract, consisting of a further
10,000m of RC drilling to be conducted after geological review.
The track and pad development for the diamond program is almost complete and the diamond drill will
continue scout drilling the area. Preparations for RC drilling will continue in Dili.
The Company will update shareholders as exploration drilling continues.
The Board has authorised for this announcement to be released to the ASX.
FURTHER INFORMATION CONTACT
Christopher J. Daws
Managing Director
Estrella Resources Limited
+61 8 9481 0389
info@estrellaresources.com.au
Media:
David Tasker
Managing Director
Chapter One Advisors
E: dtasker@chapteroneadvisors.com.au
T: +61 433 112 936
Forward Looking Statements
This announcement contains certain forward-looking statements which have not been based solely on historical facts
but, rather, on ESR’s current expectations about future events and on a number of assumptions which are subject to
significant uncertainties and contingencies many of which are outside the control of ESR and its directors, officers and
advisers.
Competent Person Statement
The information in this announcement relating to Exploration Results is based on information compiled by Steve Warriner,
who is the Group Exploration Manager of Estrella Resources, and a member of The Australasian Institute of
Geoscientists. Mr Warriner has sufficient experience relevant to the style of mineralisation and type of deposit under
consideration, and to the activity they are undertaking to qualify as Competent Persons as defined in the 2012 Edition of
the “Australasian Code for Reporting of Exploration Results, Mineral Resource and Ore Reserves”. Mr Warriner consents
to the inclusion in the report of the matters based on their information in the form and context in which it appears.
Cautionary Statement of Visual Estimates
This announcement contains references to visual results and visual estimates of mineralisation. The Company draws
attention to uncertainty in reporting visual results. Visual estimates of mineral abundance should never be considered
a proxy or substitute for laboratory analyses where concentrations or grades are the factor of principal economic
interest. Visual estimates also potentially provide no information regarding impurities or deleterious physical properties
relevant to valuations.
APPENDIX 1 JORC TABLE 1 – TIMOR-LESTE EXPLORATION
Section 1 - Sampling Techniques and Data
Criteria
Sampling
techniques
Drilling
techniques
Drill sample
recovery
JORC Code explanation
• Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any measurement
tools or systems used.
• Aspects
of
the
determination
of
mineralisation that are Material to the Public
Report. In cases where ‘industry standard’
work has been done this would be relatively
simple (e.g. ‘reverse circulation drilling was
used to obtain 1 m samples from which 3 kg
was pulverised to produce a 30 g charge for
fire assay’). In other cases more explanation
may be required, such as where there is
coarse gold that has inherent sampling
problems.
Unusual
commodities
or
mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed
information.
• Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (e.g. core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by
what method, etc).
Commentary
•
Determination of mineralisation has been
based on geological mapping, visual
mineral estimates and confirmation of
metallic concentration using a Bruker S1
Titan Portable XRF instrument.
•
Initial rock-chip samples were taken and
pXRF determinations on uncrushed
samples made in the field.
•
Samples are then brought back to Dili and
pulverized to 100% passing 1mm before
the powder is again subjected to PXRF
•
A sub-sample of 150g is then dispatched
through customs and quarantine in
Australia to ALS in Malaga for multielement analysis.
•
Exported samples are analysed using a 4acid digest, ME-XRF26s, ME-MS61L at
ALS in Malaga
•
Diamond drilling has been undertaken
utilising HQ triple tube.
•
Method of recording and assessing core and
chip sample recoveries and results
assessed.
Measures taken to maximise sample
recovery and ensure representative nature
of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or quantitative
in nature. Core (or costean, channel, etc)
photography.
The total length and percentage of the
relevant intersections logged.
If core, whether cut or sawn and whether
quarter, half or all core taken.
•
Recoveries are calculated based upon the
depth drilled and compared to core
recovered.
Sample recovery using the man-portable
diamond rig is below an acceptable
standard and the Company will swap this
diamond drill for one capable of better
recovery.
If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Quality control procedures adopted for all
sub-sampling
stages
to
maximise
•
•
•
Logging
•
•
•
Subsampling
techniques
and sample
preparation
•
•
•
•
•
•
•
•
•
•
Rock-chip samples were geologically
logged
for
mineral
content
and
photographed prior to sending for assay or
screening by pXRF.
Drill core has also been geologically
logged but will not be samples due to poor
recovery.
The trench has been mapped and
samples.
Sample sizes are appropriate to the grain
size of the mineralisation which in
manganese oxides is very fine.
The exploration program is in its very early
stages and initial sample sizes are kept
small due to freight and customs /
quarantine restrictions. They are not
considered representative of the bulk of
mineralisation.
Sampling on low recovery drillholes will
not take place as there may be a
Criteria
Quality of
assay data
and
laboratory
tests
JORC Code explanation
representivity of samples.
• Measures taken to ensure that the sampling
is representative of the in-situ material
collected, including for instance results for
field duplicate/second-half sampling.
• Whether sample sizes are appropriate to the
grain size of the material being sampled.
• The nature, quality and appropriateness of
the assaying and laboratory procedures
used and whether the technique is
considered partial or total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the analysis
including instrument make and model,
reading times, calibrations factors applied
and their derivation, etc.
• Nature of quality control procedures adopted
(e.g. standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (i.e. lack of bias) and
precision have been established.
Commentary
relationship between recovery and grade.
•
•
•
•
•
•
Verification
of sampling
and
assaying
Location of
data points
•
•
•
•
•
•
•
Data spacing
and
distribution
•
•
•
Orientation
of data in
relation to
geological
structure
•
•
The verification of significant intersections
by either independent or alternative
company personnel.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and other
locations used in Mineral Resource
estimation.
Specification of the grid system used.
Quality and adequacy of topographic
control.
Data spacing for reporting of Exploration
Results.
Whether the data spacing and distribution is
sufficient to establish the degree of
geological and grade continuity appropriate
for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications
applied.
Whether sample compositing has been
applied.
Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
•
Three sample types are quoted:
1 – Uncrushed Field PXRF (a fresh mineral
face is chipped from samples prior to the
XRF determination in the field)
2 – Crushed PXRF (samples from above
are taken back to Dili, 1-3kg of material,
and crushed/pulverised to 100% passing
1mm in the company’s dedicated sample
preparation facility, and 15g of powder is
then taken for PXRF analysis. Crushed
PXRF
determinations
have
been
subjected to repeat samples, standards
and confirmation of accuracy by laboratory
analysis.
3 – Assay, where 150g of material is
exported to ALS in Malaga via quarantine
in Darwin. Standards and blanks have not
been included in samples sent to Australia.
The company relies on the internal
standards and blanks used by ALS.
Samples are being analysed at ALS in
Malaga using a 4-acid digest, ME-ICP for
61 elements and all samples are also
being tested for Pt, Pd and Au by fire assay
and ICP-MS finish on a 50g sub-sample.
Currently, uncrushed field samples are
being analysed by PXRF on location,. The
Cautionary statement is included when
assessing pXRF.
No prior modern exploration has been
conducted in the area.
•
No adjustments to assay data were
undertaken save where the ME-XRF26s
method reports MnO%.
•
Mn% is derived by dividing MnO by 1.2912
•
Timor personnel use GRID software on
mobile phones to record GPS locations,
sampling data and photographs. Mobile
phone accuracy (shown during coordinate
capture) is set at a maximum tolerance of
5m.
Topographic control is accomplished
using 30m spaced satellite point data.
No systematic sampling has been
conducted at this early stage.
•
•
•
No orientation-based sampling bias has
been identified.
Criteria
Sample
security
JORC Code explanation
introduced a sampling bias, this should be
assessed and reported if material.
• The measures taken to ensure sample
security.
Commentary
•
•
Audits or
reviews
•
The results of any audits or reviews of
sampling techniques and data.
•
•
•
Exported samples are in the possession of
ESR personnel from field collection to
customs
submission
in
Darwin.
Possession
then
passes
to
the
Department of Agriculture, Forestry and
fisheries where Northline Couriers pick up
the samples and take them by road to ALS
in Malaga.
Non-exported samples remain with ESR
personnel past Darwin Airport Customs.
No independent audit or review has been
undertaken.
Internal QAQC involves frequent standard
checks on the PXRF instrument to
determine any drift of accuracy.
Additional checks involve analysis of any
assayed samples in comparison to the
crushed and uncrushed in-country PXRF
determinations so as to provide
confidence in in-country analysis.
Section 2 - Reporting of Exploration Results
Criteria
Mineral
tenement and
land tenure
status
JORC Code explanation
• Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint
ventures, partnerships, overriding royalties,
native title interests, historical sites,
wilderness
or
national
park
and
environmental settings.
• The security of the tenure held at the time
of reporting along with any known
impediments to obtaining a license to
operate in the area.
Exploration
done by other
parties
•
Acknowledgment
and
appraisal
exploration by other parties.
Geology
•
Deposit type, geological setting and style of
mineralisation.
of
Commentary
•
Exploration and Evaluation Concessions
MEL2023-CA-ZA001,
MEL2023-CAZA002 and MEL2023-CA-ZA003 are
awarded for two years to Estrella Murak
Rai, forming the joint-venture between
Estrella
Resources
Representante
Permanente (70%) and Murak Rai Timor
(30%).
•
Reconnaissance Permits ESR-RP-01,
ESR-RP-02, ESR-RP-03, ESR-RP-04,
were converted to Exploration Licenses
and are awarded to Estrella Resources
Limited
Representante
Permanente
(100%)
•
Exploration and Evaluation Concessions
MEL2024-DA-ZB001,
MEL2024-DAZB002 and MEL2024-DA-ZB003 are
awarded for four years to Estrella Murak
Rai, forming the joint-venture between
Estrella
Resources
Representante
Permanente (70%) and Murak Rai Timor
(30%).
•
Estrella also operated Reconnaissance
Permits ESR-RP-01, ESR-RP-02 and
ESR-RP-03
•
Estrella
Resources
Limited
Representante Permanente and Estrella
Murak Rai are registered in Timor-Leste
and is a wholly-owned subsidiary of
Estrella Resources Limited (Australia).
•
All of the Concessions and Permits are
current and in good standing.
•
The first exploration was conducted by
Allied Mining Corporation in 1937 during
which mineral potential was discovered.
Very small-scale mining of manganese,
gold and construction material was
conducted. The exploration was not
systematic and hampered by difficult
access.
•
Other work in the early 2000’s has been
conducted by the Pacific Economic
Cooperation Council -PECC Minerals
Network to assist Timor-Leste to
understand and develop its minerals
potential.
•
Local geologists and companies have
sporadically explored the area however
there has been no documentation
collected nor systematic exploration to
quantify mineral occurrences.
•
No minerals drilling has taken place.
•
No close-spaced geophysics has taken
place.
•
No systematic, modern exploration has
taken place.
•
The Geological Institute of Timor-Leste
(IGTL) has recently (and still is)
conducting stratigraphic analysis and
fossil dating to reconstruct the geological
history of Timor-Leste.
•
The current Concessions and Permits
host three main forms of manganese
mineralisation.
•
Primary mineralisation can be found in
stratigraphic banded cherts and banded
irons formed from direct precipitation of
manganese onto the sea floor. Evidence
for both microbial and inorganic
Criteria
JORC Code explanation
Drill hole
information
• A summary of all information material to the
under-standing of the exploration results
including a tabulation of the following
information for all Material drill holes:
• easting and northing of the drill hole
collar
• elevation or RL (Reduced Level –
elevation above sea level in metres) of
the drill hole collar
• dip and azimuth of the hole
• down hole length and interception depth
• hole length
• If the exclusion of this information is justified
on the basis that the information is not
Material and this exclusion does not detract
from the understanding of the report, the
Competent Person should clearly explain
why this is the case.
• In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of
high grades) and cut-off grades are usually
Material and should be stated.
• Where aggregate intercepts incorporate
short lengths of high grade results and
longer lengths of low grade results, the
procedure used for such aggregation
should be stated and some typical
examples of such aggregations should be
shown in detail.
• The assumptions used for any reporting of
metal equivalent values should be clearly
stated.
• These
relationships
are
particularly
important in the reporting of Exploration
Results.
• If the geometry of the mineralisation with
respect to the drill hole angle is known, its
nature should be reported.
• If it is not known and only the down hole
lengths are reported, there should be a clear
statement to this effect (e.g. ‘down hole
length, true width not known’).
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
Reporting
• Appropriate maps and sections (with scales)
and tabulations of intercepts should be
included for any significant discovery being
reported. These should include, but not be
limited to a plan view of drill hole collar
locations and appropriate sectional views.
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
Commentary
processes exist.
•
Secondary mineralisation exists as a
supergene blanket above the cherts
where they have been exposed to
chemical weathering.
•
Tertiary mineralisation exists where high
rainfall and erosion has sorted and
concentrated detrital manganese into
river paleo-channels or scree deposits.
•
Alluvial gold mineralisation has been
reported in the area however no
exploration has been undertaken.
•
Estrella will use and expand upon the
current known stratigraphy to evaluate
and document mineralisation styles and
relate them back to the tectonostratigraphic genesis of the area.
• No drilling has been undertaken in the
area.
• Sample locations are shown in the body of
the text.
•
•
•
Exploration results with all relevant
drillhole information are reported in the
body of the text.
No aggregation methods have been used.
Metal equivalent values have not been
used.
•
Any relationships have been discussed
within the body of the text.
•
Relevant diagrams have been included
within the main body of text.
•
No new information has been withheld.
Criteria
Other
substantive
exploration
data
Further work
JORC Code explanation
other locations used in Mineral Resource
estimation.
• Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low and high
grades and/or widths should be practiced to
avoid misleading reporting of Exploration
Results.
• Other exploration data, if meaningful and
material, should be reported including (but
not limited to): geological observations;
geophysical survey results; geochemical
survey results; bulk samples - size and
method of treatment; metallurgical test
results;
bulk
density,
groundwater,
geotechnical and rock characteristics;
potential deleterious or contaminating
substances.
• The nature and scale of planned further
work (e.g. tests for lateral extensions or
depth extensions or large- scale step-out
drilling).
• Diagrams clearly highlighting the areas of
possible extensions, including the main
geological interpretations and future drilling
areas, provided this information is not
commercially sensitive.
Commentary
•
All observations are discussed within the
body of the text.
•
Further work by ESR will include
trenching and mapping
Additional work on specific areas will be
included under the heading Next Steps in
the body of the text when appropriate to
do so.
•
Share your feedback
Discover