Manganese Oxide Intercept Ira Miri Project
Released
Released
Announcement PDF
ASX: ESR
23 June 2025
7.76m Manganese Oxide Intercept Ira Miri Project
HIGHLIGHTS
➔ EMDD002 intersects 7.76m of Manganese Oxides 30cm below surface at Ira Miri Project in the virtually
unexplored region of Timor-Leste (Figure 1 & 2)
➢
Drillhole twins EMDD001 which ended in mineralisation with assays expected in 6 weeks1
➔ The Boart Longyear Deltabase 525 track-mounted diamond drill rig is currently being re-located to the
next target with the track and pad development for the diamond campaign well underway
➔ Estrella’s exploration campaign is gathering pace with separate teams simultaneously drilling at Ira
Miri, reconnaissance mapping the southern Lautém permits and conducting community liaison and
environmental works in Baucau.
➔ Community consultation and preliminary scoping works commenced at Werumata Limestone
Project with potential for future drilling campaign targeting large (3.5km x 3.5km) prospective area2
➔ Successful site visit by potential investors and significant shareholders to Ira Miri and Werumata
including dignitaries from the Timorese regulatory authority (ANM), state mining company (MRT), the
Timor-Leste Parliament, Local Government and national media outlets
➔ Timor-Leste Prime Minister, Xanana Gusmão met with Estrella Management, investors and partners
to express his full support for the Companies projects
Figure 1: Estrella Geophysicist Eustaquio Amaral and Geologist Gregorio Pereira looking over the massive manganese
oxides intersected in the start of diamond drillhole EMDD002. Visual estimates are shown in Table 1.
1
Refer to ASX Announcement dated: 3 June 2025
Refer to ASX Announcement dated: 21 May 2025
_____________________________________________________________________________________________________________
Office Address London House, Level 8, 216 St Georges Terrace, PERTH WA 6000 Postal Address GPO Box 2517, PERTH WA 6831
Phone +61 8 9481 0389 Fax +61 8 9463 6103
Email info@estrellaresources.com.au
2
Estrella Resources Limited (ASX: ESR) (Estrella or the Company) is pleased to announce the intersection
of 7.76m of massive manganese oxide from 0.29m down hole at the Company’s Ira Miri Manganese Project,
as part of the first ever modern minerals exploration campaign in Timor-Leste.
Commenting on the intersection Estrella Managing Director Chris Daws said:
“Estrella continues to build serious momentum as our maiden drilling campaign unfolds in the virtually
unexplored region of Timor-Leste.
These latest results which effectively twin our first hole are strategically important, providing the Company
with complete core for geological analysis and data on the depth of our initial manganese discovery. The
depth is particularly impressive and while it is only one hole, if replicated at scale would place the project in
a pretty special tier, globally. We are also eagerly awaiting assay results from the friable manganese
unearthed from EMDD001 which are expected to be available in approximately six weeks.
I am continually impressed by the interest in our project and I was humbled by the recent recognition we
received from Timor-Leste Prime Minister Xanana Gusmão. Our site tour to our manganese and limestone
projects was very well attended and included participation from a number of Timor-Leste’s emerging minerals
industry figures as well as major Estrella investors.
I look forward to updating shareholders with further exploration updates. Go Estrella!”
Figure 2: Tray 1 (right) to tray 3 (left) of EMDD002 showing the full intersection of PQ core with visual estimates presented
in Table 1
Drill hole EMDD002 was drilled to twin EMDD001 which intersected 6.45m of manganese oxides before
stopping in mineralisation due to technical issues related to recovery of the friable mineralisation.
To improve core recoveries, the hole was drilled by CoreSearch’s Boart Longyear Deltabase 525 diamond
drill rig which was repurposed from doing geotechnical drilling and adapted for exploration diamond drilling.
In addition a change in the regime of drilling muds used along with swapping to PQ3 sized gear has vastly
improved the recovery of the manganese mineralisation to an acceptable level under the JORC Code.
Similar to EMDD001, the mineralisation in the outcrop appears to also be observed at depth and is
interpreted to be derived directly from the Noni Formation, as predicted by our exploration model.
The weathering that gave rise to the mineralisation appears well preserved given that it was buried below
over 2.5km of the Baucau Formation for the past million years.
A sumarised drill log and visual estimates of the drillhole is given in Table 1.
For comparison, the mineralisation at Groote Eylandt Manganese Deposit3 located in the Gulf of
Carpentaria ranges from 0.1m to 11.5m thickness, and averages 3m in width. Although the age of the
mineralisation of Groote Eylandt is the same as at Ira Miri, the method of formation of manganese at Ira
Miri is terrestrial in origin consisting of in-situ supergene enrichment of the Noni Formation.
Figure 3: Pictured above are the in-country geologists who made the Ira Miri discovery during a return trip to the area.
The EMDD002 intersection contained significantly broad zones of mineralisation with evidence of local
physical weathering features such as cracking and tree-root infiltration. This is to be expected on the leading
edge of the exposed mineralisation. Subsequent drilling will determine continuity of the mineralisation.
Table 1: Visual estimates of EMDD0002
From
0
0.29
0.54
1.6
2
6
6.4
7.8
8.05
17.9
To
0.29
0.54
1.6
2
6
6.4
7.8
8.05
17.9
20.2
Interval
0.29
0.25
1.06
0.4
4
0.4
1.4
0.25
9.85
2.3
Description
Recent soil cover
Manganese oxides with remnant silica
Manganese oxides
Manganese oxides with remnant clays
Manganese oxides
Remnant clays with manganese bleed zones
Manganese oxides
Manganese oxides with remnant clays
Clay zone
Saprock
Visual Estimate
Colluvial sediments
80% MnO, 20% Silica
100% MnO
70% MnO, 30% Clay
100% MnO
90% Clay, 10% MnO
100% MnO
60% Clay, 40% MnO
100% Clay
100% Noni Mudstone
Refer to Munson TJ, Ahmad M and Dunster JN 2013. Chapter 39 : Carpentaria Basin ‘Geology and mineral resources of the
Northern Territory’. Northern Territory Geological Survey, Special Publication 5.
3
Cautionary Statement of Visual Estimates
Table 1 contains references to visual results and visual estimates of mineralisation. The Company draws attention to
uncertainty in reporting visual results. Visual estimates of mineral abundance should never be considered a proxy or
substitute for laboratory analyses where concentrations or grades are the factor of principal economic interest. Visual
estimates also potentially provide no information regarding impurities or deleterious physical properties relevant to
valuations.
Estrella’s management has invested considerable time developing its in-country geological, geophysical
and community liaison capability. This maiden discovery not only reflects the predictive power of Estrella’s
exploration model but is also contingent on the strong uptake of training to develop local exploration
capability.
Estrella’s Exploration Manager, Steve Warriner has overseen and expanded the exploration team to 12
members, ranging in skill sets from junior and senior geologists through to skilled in-country managers with
previous experience in senior government positions.
Site Investor Visit
Concurrently, Estrella completed a site visit with current and potential investors. The visit also included
dignitaries from the Local Governments of Lautém and Baucau, from the National Government, from the
Autoridade Nacional dos Minerais (ANM), Estrella’s joint-venture partner Murak Rai Timor (MRT) and the
Timor-Leste national media.
The trip started off with recognition from current Prime Minister, Xanana Gusmão who expressed TimorLeste’s commitment to companies like Estrella which embrace the advancement of the nation through
exploration and investing in the development of Timor-Leste’s capabilities to sustain itself into the future.
Figure 4: Timor-Leste Prime Minister Xanana Gusmão welcoming Estrella’s Managing Director Chris Daws during a
meeting with management, shareholders and investors in Dili, the capital city of Timor-Leste.
The site visit included the Com Port, the current drilling at Ira Miri and the potential Werumata Limestone
Project in Baucau.
The large contingent was shown around site by the Estrella team and were able to witness the drilling of
EMDD002, the trench dug into massive manganese oxides near the drill site and the new outcropping
discovery of massive manganese oxides located some 350m to the north northwest of drilling.
Figure 5: Over 50 investors and dignitaries during site induction at the Ira Miri Manganese Project, Timor-Leste
Figure 6: Estrella Exploration Manager Steve Warriner describing the manganese formation process and local geology to
the investor group at the Ira Miri discovery site
After the trip to Ira Miri, the group visited the Werumata Limestone Project which Estrella is developing in
the Baucau Municipality. Werumata is located on the recent Reconnaissance Permit conversion,
Exploration and Evaluation License MEL2025-DA-ZA003 (Figure 7).
Figure 7: Location of the Werumata Limestone Project with respect to Estrella's License and Permit holdings.
Community consultation and preliminary scoping works have begun at Werumata to clear the way for the
environmental licensing required for Estrella to begin drilling.
The Company is initially targeting a very large and highly prospective resource area estimated to cover
approximately 3.9km2.
The project is located in a very low population area with no habitation occuring in or immediately around
the project site, with easy access to grid power, major transport and to the ocean.
Figure 8: Managing Director Chris Daws standing at around 50m above sea level with the targeted Werumata limestones
gently rising up behind to a height of 450m above sea level, the back of the project being some 2.2 km away. The
powerline is located 700m from an unpopulated coastal area.
The incredible support expressed by the Timor-Leste Prime Minister, Minister of Mines and Petroleum,
the ANM, joint-venture partner MRT, The Municipalities of Baucau and Lautém and by the local
Werumata and Ira Miri communities has been overwhelming.
These expressions of solidarity with Estrella’s manganese and limestone exploration and development
plans have reassured the Company of the importance the Timor-Leste Government takes in jointly
developing the Minerals Industry.
Next Steps
Drilling at Ira Miri will continue as planned with progressive step-out diamond holes targeting the buried
manganese layers. Drilling is at a very early stage and as more geological information comes to hand the
drill program will be adapted to give a sense of scale prior to any infill drilling.
Assays from the initial EMDD001 drilling are anticipated in approximately six weeks.
Concurrently the track and pad development team will continue setting up Ira Miri prior to moving to set up
for RC drilling at Sica. It is expected that the Sica scout drilling will commence in late July.
The Werumata community liaison process will continue along with baseline environmental surveys in
preparation for the application for the Category B environmental license required before Estrella can begin
drilling to define a resource.
Meanwhile, the mapping team will continue work on the southern Reconnaissance Permits for the next
month before focussing their efforts on our Baucau tenements where significant manganese outcrops were
located.
The Company will update shareholders as exploration drilling continues.
The Board has authorised for this announcement to be released to the ASX.
FURTHER INFORMATION CONTACT
Christopher J. Daws
Managing Director
Estrella Resources Limited
+61 8 9481 0389
info@estrellaresources.com.au
Media:
David Tasker
Managing Director
Chapter One Advisors
E: dtasker@chapteroneadvisors.com.au
T: +61 433 112 936
Forward Looking Statements
This announcement contains certain forward-looking statements which have not been based solely on historical facts
but, rather, on ESR’s current expectations about future events and on a number of assumptions which are subject to
significant uncertainties and contingencies many of which are outside the control of ESR and its directors, officers and
advisers.
Cautionary Statement of pXRF - pXRF results that are announced in this report are from uncrushed, rock-chip
samples and are preliminary only. The use of the PXRF is an indication only of the order of magnitude of expected final
assay results. The samples that are the subject of this report will be submitted for laboratory assay in Australia and
some variation from the results presented herein should be expected.
Competent Person Statement
The information in this announcement relating to Exploration Results is based on information compiled by Steve Warriner,
who is the Group Exploration Manager of Estrella Resources, and a member of The Australasian Institute of
Geoscientists. Mr Warriner has sufficient experience relevant to the style of mineralisation and type of deposit under
consideration, and to the activity they are undertaking to qualify as Competent Persons as defined in the 2012 Edition of
the “Australasian Code for Reporting of Exploration Results, Mineral Resource and Ore Reserves”. Mr Warriner consents
to the inclusion in the report of the matters based on their information in the form and context in which it appears.
Cautionary Statement of Visual Estimates
This announcement contains references to visual results and visual estimates of mineralisation. The Company draws
attention to uncertainty in reporting visual results. Visual estimates of mineral abundance should never be considered
a proxy or substitute for laboratory analyses where concentrations or grades are the factor of principal economic
interest. Visual estimates also potentially provide no information regarding impurities or deleterious physical properties
relevant to valuations.
Table 2: Collar and survey details for EMDD002
North
-8.4248
East
126.912
RL
170
Depth
20.2
Dip
-90
Azi
0
APPENDIX 1 JORC TABLE 1 – TIMOR-LESTE EXPLORATION
Section 1 - Sampling Techniques and Data
Criteria
Sampling
techniques
Drilling
techniques
Drill sample
recovery
JORC Code explanation
• Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any measurement
tools or systems used.
• Aspects
of
the
determination
of
mineralisation that are Material to the Public
Report. In cases where ‘industry standard’
work has been done this would be relatively
simple (e.g. ‘reverse circulation drilling was
used to obtain 1 m samples from which 3 kg
was pulverised to produce a 30 g charge for
fire assay’). In other cases more explanation
may be required, such as where there is
coarse gold that has inherent sampling
problems.
Unusual
commodities
or
mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed
information.
• Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (e.g. core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by
what method, etc).
Commentary
•
Diamond drilling has been undertaken
utilising PQ triple tube.
•
Method of recording and assessing core and
chip sample recoveries and results
assessed.
Measures taken to maximise sample
recovery and ensure representative nature
of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or quantitative
in nature. Core (or costean, channel, etc)
photography.
The total length and percentage of the
relevant intersections logged.
If core, whether cut or sawn and whether
quarter, half or all core taken.
•
Recoveries are calculated based upon the
depth drilled and compared to core
recovered.
Sample recovery on this hole has averaged
>95%
If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet or
dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Quality control procedures adopted for all
sub-sampling
stages
to
maximise
representivity of samples.
•
•
•
Logging
•
•
•
Subsampling
techniques
and sample
preparation
•
•
•
•
•
•
•
•
•
•
•
•
•
Initial rock-chip samples were taken and
pXRF determinations on uncrushed
samples made in the field.
Samples are then brought back to Dili and
pulverized to 100% passing 1mm before
the powder is again subjected to PXRF
A sub-sample of 150g is then dispatched
through customs and quarantine in
Australia to ALS in Malaga for multielement analysis.
Exported samples are analysed using a 4acid digest, ME-XRF26s, ME-MS61L at
ALS in Malaga
Rock-chip samples were geologically
logged
for
mineral
content
and
photographed prior to sending for assay or
screening by pXRF.
Drill core has also been geologically
logged but will not be samples due to poor
recovery.
Sample sizes are appropriate to the grain
size of the mineralisation which in
manganese oxides is very fine.
The drill core is manually split as it would
not survive being put through a wet core
saw process without introducing sample
loss.
Sampling on low recovery drillholes will
not take place as there may be a
relationship between recovery and grade.
Criteria
Quality of
assay data
and
laboratory
tests
Verification
of sampling
and
assaying
Location of
data points
JORC Code explanation
• Measures taken to ensure that the sampling
is representative of the in-situ material
collected, including for instance results for
field duplicate/second-half sampling.
• Whether sample sizes are appropriate to the
grain size of the material being sampled.
• The nature, quality and appropriateness of
the assaying and laboratory procedures
used and whether the technique is
considered partial or total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the analysis
including instrument make and model,
reading times, calibrations factors applied
and their derivation, etc.
• Nature of quality control procedures adopted
(e.g. standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (i.e. lack of bias) and
precision have been established.
Commentary
•
Laboratory tests are yet to be undertaken.
•
•
No prior modern exploration has been
conducted in the area.
•
Timor personnel use GRID software on
mobile phones to record GPS locations,
sampling data and photographs. Mobile
phone accuracy (shown during coordinate
capture) is set at a maximum tolerance of
5m.
Topographic control is accomplished
using 30m spaced satellite point data.
No systematic sampling has been
conducted at this early stage.
•
•
•
•
•
•
Data spacing
and
distribution
•
•
•
Orientation
of data in
relation to
geological
structure
•
Sample
security
•
•
The verification of significant intersections
by either independent or alternative
company personnel.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and other
locations used in Mineral Resource
estimation.
Specification of the grid system used.
Quality and adequacy of topographic
control.
Data spacing for reporting of Exploration
Results.
Whether the data spacing and distribution is
sufficient to establish the degree of
geological and grade continuity appropriate
for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications
applied.
Whether sample compositing has been
applied.
Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
The measures taken to ensure sample
security.
•
•
•
No orientation-based sampling bias has
been identified.
•
Exported samples are in the possession of
ESR personnel from field collection to
customs
submission
in
Darwin.
Possession
then
passes
to
the
Department of Agriculture, Forestry and
fisheries where Northline Couriers pick up
the samples and take them by road to ALS
in Malaga.
Non-exported samples remain with ESR
personnel past Darwin Airport Customs.
No independent audit or review has been
undertaken.
•
Audits or
reviews
•
The results of any audits or reviews of
sampling techniques and data.
•
Section 2 - Reporting of Exploration Results
Criteria
Mineral
tenement and
land tenure
status
JORC Code explanation
• Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint
ventures, partnerships, overriding royalties,
native title interests, historical sites,
wilderness
or
national
park
and
environmental settings.
• The security of the tenure held at the time
of reporting along with any known
impediments to obtaining a license to
operate in the area.
Exploration
done by other
parties
•
Acknowledgment
and
appraisal
exploration by other parties.
Geology
•
Deposit type, geological setting and style of
mineralisation.
of
Commentary
•
Exploration and Evaluation Concessions
MEL2023-CA-ZA001,
MEL2023-CAZA002 and MEL2023-CA-ZA003 are
awarded for two years to Estrella Murak
Rai, forming the joint-venture between
Estrella
Resources
Representante
Permanente (70%) and Murak Rai Timor
(30%).
•
Reconnaissance Permits ESR-RP-01,
ESR-RP-02, ESR-RP-03, ESR-RP-04,
were converted to Exploration Licenses
and are awarded to Estrella Resources
Limited
Representante
Permanente
(100%)
•
Exploration and Evaluation Concessions
MEL2024-DA-ZB001,
MEL2024-DAZB002 and MEL2024-DA-ZB003 are
awarded for four years to Estrella Murak
Rai, forming the joint-venture between
Estrella
Resources
Representante
Permanente (70%) and Murak Rai Timor
(30%).
•
Estrella also operated Reconnaissance
Permits ESR-RP-01, ESR-RP-02 and
ESR-RP-03
•
Estrella
Resources
Limited
Representante Permanente and Estrella
Murak Rai are registered in Timor-Leste
and is a wholly-owned subsidiary of
Estrella Resources Limited (Australia).
•
All of the Concessions and Permits are
current and in good standing.
•
The first exploration was conducted by
Allied Mining Corporation in 1937 during
which mineral potential was discovered.
Very small-scale mining of manganese,
gold and construction material was
conducted. The exploration was not
systematic and hampered by difficult
access.
•
Other work in the early 2000’s has been
conducted by the Pacific Economic
Cooperation Council -PECC Minerals
Network to assist Timor-Leste to
understand and develop its minerals
potential.
•
Local geologists and companies have
sporadically explored the area however
there has been no documentation
collected nor systematic exploration to
quantify mineral occurrences.
•
No minerals drilling has taken place.
•
No close-spaced geophysics has taken
place.
•
No systematic, modern exploration has
taken place.
•
The Geological Institute of Timor-Leste
(IGTL) has recently (and still is)
conducting stratigraphic analysis and
fossil dating to reconstruct the geological
history of Timor-Leste.
•
The current Concessions and Permits
host three main forms of manganese
mineralisation.
•
Primary mineralisation can be found in
stratigraphic banded cherts and banded
irons formed from direct precipitation of
manganese onto the sea floor. Evidence
for both microbial and inorganic
Criteria
JORC Code explanation
Drill hole
information
• A summary of all information material to the
under-standing of the exploration results
including a tabulation of the following
information for all Material drill holes:
• easting and northing of the drill hole
collar
• elevation or RL (Reduced Level –
elevation above sea level in metres) of
the drill hole collar
• dip and azimuth of the hole
• down hole length and interception depth
• hole length
• If the exclusion of this information is justified
on the basis that the information is not
Material and this exclusion does not detract
from the understanding of the report, the
Competent Person should clearly explain
why this is the case.
• In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (e.g. cutting of
high grades) and cut-off grades are usually
Material and should be stated.
• Where aggregate intercepts incorporate
short lengths of high grade results and
longer lengths of low grade results, the
procedure used for such aggregation
should be stated and some typical
examples of such aggregations should be
shown in detail.
• The assumptions used for any reporting of
metal equivalent values should be clearly
stated.
• These
relationships
are
particularly
important in the reporting of Exploration
Results.
• If the geometry of the mineralisation with
respect to the drill hole angle is known, its
nature should be reported.
• If it is not known and only the down hole
lengths are reported, there should be a clear
statement to this effect (e.g. ‘down hole
length, true width not known’).
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
Reporting
• Appropriate maps and sections (with scales)
and tabulations of intercepts should be
included for any significant discovery being
reported. These should include, but not be
limited to a plan view of drill hole collar
locations and appropriate sectional views.
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
Commentary
processes exist.
•
Secondary mineralisation exists as a
supergene blanket above the cherts
where they have been exposed to
chemical weathering.
•
Tertiary mineralisation exists where high
rainfall and erosion has sorted and
concentrated detrital manganese into
river paleo-channels or scree deposits.
•
Alluvial gold mineralisation has been
reported in the area however no
exploration has been undertaken.
•
Estrella will use and expand upon the
current known stratigraphy to evaluate
and document mineralisation styles and
relate them back to the tectonostratigraphic genesis of the area.
• No drilling has been undertaken in the
area.
• Sample locations are shown in the body of
the text.
•
•
•
Exploration results with all relevant
drillhole information are reported in the
body of the text.
No aggregation methods have been used.
Metal equivalent values have not been
used.
•
Any relationships have been discussed
within the body of the text.
•
Relevant diagrams have been included
within the main body of text.
•
No new information has been withheld.
Criteria
Other
substantive
exploration
data
Further work
JORC Code explanation
other locations used in Mineral Resource
estimation.
• Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low and high
grades and/or widths should be practiced to
avoid misleading reporting of Exploration
Results.
• Other exploration data, if meaningful and
material, should be reported including (but
not limited to): geological observations;
geophysical survey results; geochemical
survey results; bulk samples - size and
method of treatment; metallurgical test
results;
bulk
density,
groundwater,
geotechnical and rock characteristics;
potential deleterious or contaminating
substances.
• The nature and scale of planned further
work (e.g. tests for lateral extensions or
depth extensions or large- scale step-out
drilling).
• Diagrams clearly highlighting the areas of
possible extensions, including the main
geological interpretations and future drilling
areas, provided this information is not
commercially sensitive.
Commentary
•
All observations are discussed within the
body of the text.
•
Further work by ESR will include
trenching and mapping
Additional work on specific areas will be
included under the heading Next Steps in
the body of the text when appropriate to
do so.
•
Share your feedback
Discover